Power Battery Of The Aircraft; Power Battery Level Check Of The Aircraft; Power Battery Charging Of The Aircraft - AEE MACH4 User Manual

AEE Unmanned Aircraft System
Professional Leading
Battery level of Y12 remote control
Power ≥75%
50% ≤ Power <75%
25%≤ Power＜50%
Power＜25%
Power check after power on: After turning on the power of Y12 remote control, it will automatically enter the
ground station software (hereinafter referred to as GS), and the battery level of the remote control will be displayed
on the remote control.

Power battery of the aircraft

Power battery level check of the aircraft

Insert the power indicator into the internal buckle of the flexible flat cable of the battery, and the power
indicator will display the total power (6S, 25.2V) and the battery voltage of each cell, as shown below:
Note: The black wire corresponds to "7" when connected.

Power battery charging of the aircraft

The power battery of the aircraft is equipped with a professional intelligent balance charger, built-in high-
performance microprocessor and professional operating software. Please connect the battery and charger as shown
below:
Status light display (blue light)
Four status lights are on
Three status lights are on
Two status lights are on
One status light is on
Flexible flat cable for battery level detection
- 4 -