Table of Contents
Advertisement
AEE Unmanned Aircraft System
Professional Leading
Drone settings
Under the functional parameter options, relevant parameters of the drone, such as: one button
take-off altitude, first-level and second-level low-power alarm values can be set. As shown below:
Camera parameters
Drone settings
Remote control
settings
Map management
Firmware upgrade
Version information
Image transmission
information
Remote control settings
Under the functional parameter options, the parameters of the remote control, such as joystick
calibration, joystick sensitivity and viewing the joystick value can be set. As shown below:
Camera parameters
Drone settings
Remote control
settings
Map management
Firmware upgrade
Version information
Image transmission
information
Image transmission
information
Altitude hold mode
Take-off altitude
First-level alarm
Second-level alarm
First-level alarm action:
Only the indicator flashes
Return
Landing
Second-level alarm action:
1. Put the drone horizontally and rotate it.
Compass calibration
2. Put the drone vertically and rotate it.
3. Restart the drone and click "Calibration completed" after restarting.
Altitude hold mode
Pitching
Yaw
Roll
Return
Landing
Apply
Throttle
1. Start calibration, please center the joystick
2. Please make the joystick to the maximum value
Start
calibration
Advertisement
Table of Contents
