Husqvarna 555FX Operator's Manual page 4

35. Locknut (555FRM)
36. Support flange (555FRM)
37. Shredder blade (555FRM)
38. Drive disc (555FRM)
39. Cutting attachment guard (555FRM)
40. Transport guard (555FRM)
41. Locknut (555RXT)
42. Support cup (555RXT)
43. Support flange (555RXT)
44. Grass blade (555RXT)
45. Drive disc (555RXT)
46. Cutting attachment guard (555RXT)
47. Transport guard (555FX, 555FXT, 555RXT)
48. Operator's manual
49. Socket wrench
50. Locking pin
51. Carburetor screwdriver
52. Hex key
Symbols on the product
WARNING! Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
The product can cause objects to eject,
which can cause injury.
Keep a minimum distance of 15 m/49 ft to
persons and animals during operation of the
product.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
4
body parts. Keep a minimum of 15 m/49 ft
distance to persons and animals during
operation of the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Air purge bulb.
Choke.
Fuel.
Decompression valve.
Heated handles.
Only use a flexible cutting wire. Do not use
metal cutting attachments. Apply this for
grass guard accessory.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
The rating plate shows the
serial number. yyyy is the
production year and ww is
the production week.
1346 - 002 - 08.10.2019