Husqvarna 555FX Operator's Manual page 29

a) Install the cover for the starter housing (C) and
the cover for the air filter holder (B).
b) Remove the air filter and the air filter cover.
Install the air filter (E) and air filter cover (A).
• In temperatures below -5°C/23°F, install the wear
guard with an air duct (D).
1346 - 002 - 08.10.2019
CAUTION: At temperatures of more than
-5°C/23°F or 0°C/32°F, remove the winter kit
from the product. There is a risk of engine
damages.
To lubricate the wire (555FXT)
Note: The wire is lubricated at the factory. Lubricate the
wire monthly.
1. Remove the protective cover.
2. Remove the cylinder cover to get access to the
rubber bellows on the wire.
3. Remove the plug on the grease nipple.
4. Use antifreeze spray with a 2 mm spray tube. Spray
in short intervals.
5. Examine the rubber bellows on the wire to make
sure that it does not expand.
6. Attach the cylinder cover and the protective cover.
29