Pci/Plug And Play Setup - PCchips M717 User Manual

BIOS Setup

PCI/Plug and Play Setup

Choose the item from the BIOS Setup main menu.
Plug and Play Set this option to Yes if the operation system
in this computer is aware of and follows the
Aware OS
Plug and Play specification. Currently, only
Windows 95 is PnP-aware.
PCI VGA Palette When this option is set to Enabled, multiple
Snoop VGA devices operating on different buses can
handle data from the CPU on each set of
palette registers on every video device. Bit 5
of the command register in the PCI device
configuration space is the VGA Palette Snoop
bit (0 is disabled).
Allocate IRQ to This option is used to allocate IRQ to PCI
PCI VGA VGA. Recommendation is set to No.
OffBoard PCI IDE This option specifies if an offboard PCI IDE
Card controller adapter card is installed in the
computer. You must specify the PCI
expansion slot on the motherboard where the
offboard PCI IDE controller is installed. If an
offboard PCI IDE controller is used, the
onboard IDE controller is automatically
disabled. If an offboard PCI IDE controller
adapter card is installed in the computer, you
must also set the Offboard PCI IDE Primary
IRQ and Offboard PCI IDE Secondary IRQ
options.
Pri. OffBoard PCI These options specify the PCI interrupt used
IDE IRQ; by the Primary (or secondary) IDE channel on
Sec. OffBoard PCI the offboard PCI IDE controller.
IDE IRQ
29