iiNet Budii Quick Installation Manual

Quick Installation Guide
Welcome to Budii
Budii Checklist
TM
First, we need to get the
Budii must be configured for the Internet before you can connect your computer.
TM
Select one of the three options below depending on your service with iiNet.
1
OPTION
You've signed up for an iiNet Naked
broadband plan (Naked Home) - jump to
option 1 below.
1
OPTION
Phone Cable
2
OPTION
Line Filter
Before connecting to your computer, make sure the ADSL sync and Internet lights on the front of Budii
five minutes while a connection to the Internet is established. If the lights are not illuminating refer to the troubleshooting section of the Budii
iiNet support using the numbers below. You can connect multiple computers and laptops using one of the following methods.
Wireless
Turn over to view the Wireless Setup Guide
for instructions on connecting your computer
wirelessly. Ensure the computer you use has
wireless inbuilt and is turned on, or has an
external wireless adapter.
Wired
Using the supplied yellow ethernet cable:
1. Plug the yellow Ethernet cable into one of
the seven black ports on the back of Budii
2. Plug the other end into your computer's
Ethernet port.
3. Wait 15 seconds.
4. Try using a browser to surf to a website.
Hooray!
You have successfully set up Budii
least two lights on the front of Budii
now illuminated.
ADSL Sync
Internet
iiqigbudii_v001
The Budii
.
TM
Budii
phone and power cables plugged in and working.
TM
You've signed up for an ADSL broadband plan
with iiNet (ADSL2+ Home or ADSL1 Home
plan). You still have a traditional landline in
place to make and receive calls - jump to
option 2 below.
Power Cable
1
2
Phone Cable
Power Cable
1
2
Connecting Budii
.
TM
Having trouble?
and at Refer to the user manual for help
TM
are setting up your user name and
TM
password manually. If you're still
experiencing problems please contact
iiNet Support for assistance. iiNet
provides free technical support for
Budii
Wireless Setup
If you need help setting up Budii
wirelessly, turn over to visit the
Wireless Setup Guide.
Important
If you have other phones connected
in your house, you'll need to install
filter devices to each of these phones.
For further information, contact iiNet
Support.
Quick Installation Guide provides easy, step-by-step instructions
TM
on setting up and connecting your new hardware.
Before we get started,
check the following
items are included in
your Budii
Power
Cord
2
OPTION
1. Connect the power cord and adapter to the power port on Budii
the power adapter into the wall socket. Turn the Budii
and wait for the green light to illuminate.
2. Plug one of the phone cables (which can be found in your Budii
into the socket labelled ADSL on the back of Budii
straight into the phone socket on your wall. You don't need the line filter
provided with Budii
3. Your setup should look like the image to the left.
4. If you have an active iiNet connection, Budii
talking to iiNet's servers. Budii
settings during this time, so please allow time for this to happen. If
Power you're waiting for your iiNet service to be activated then Budii
unable to connect to the Internet.
5. To use your iiTalk phone service, you'll need to turn on your handset.
5 Press the 'ii' button located on your handset to start making calls.
6. Now go to the section below called "Connecting Budii
computer."
1. Connect the power adapter to the power port on Budii
adapter into the wall socket. Turn the Budii
for the green light to illuminate.
2. Plug one of the phone cables (which can be found in your Budii
into the socket labelled ADSL on the back of Budii
3. Take the line filter out of the box. Plug the other end of the phone cable
into the ADSL socket on the line filter. Then, plug the line filter into your
wall phone socket. If your existing home phone is plugged into the wall
socket - you'll need to remove it first.
4. The next step is to take the second phone cable (which can be found in
your Budii
other end into the green socket labelled PSTN on Budii
Power
5. Your setup should look like the image to the left. If you have an active
iiNet connection, Budii
Budii will retrieve your login details and other settings during this time,
TM
so please allow time for this to happen. If you're waiting for your iiNet
3
DSL service to be activated then Budii
Internet. Now go to the section below called "Connecting Budii
computer."
4
6. To use your phone service, you'll need to turn on your handset. Press the
'ii' button located on your handset to start making calls.
to your computer
TM
Line Filter
Phone Cable
Power Cable
.
TM
TM
box.
TM
Power Line Ethernet
Pack Filter Cable
Choose an option that
most suits your setup
and follow the steps to
get connected.
OPTION
Manual setup: You have the Internet connected
through another provider or you prefer to do
things the old fashioned way - please visit the
'How to guide' in the Budii
so store it away somewhere safe.
TM
TM
will retrieve your login details and other
TM
TM
box). Plug one end into the line filter marked Phone and the
TM
will automatically start talking to iiNet's servers.
TM
will be unable to connect to the
TM
are illuminated. If the lights are flashing, wait for up to
TM
Ethernet Cable
Phone Cable
iiNet Support
1300 860 951
support@iinet.net.au
iiNet Business Support
bizsupport@iinet.net.au
Westnet Support
1300 786 068
support@westnet.com.au
TransACT Support
support@transact.com.au
Internode Support
support@internode.on.net
Phone
Cable x 2
3
manual.
TM
. Plug
TM
power button on
TM
box)
TM
. Plug the other end
TM
will automatically start
will be
TM
to your
TM
. Plug the power
TM
power button on and wait
box)
TM
.
TM
.
TM
to your
TM
manual or contact
TM
13 24 49
13 30 61
13 66 33