Philips HD4918/10 User Manual page 17

Problem
The Hr:Min light does
not go on when I set the
cooking time.
The timer light does not go
on when I set the timer.
I cannot change the power
setting before I select the
Stew mode or Soup/
Congee mode.
The appliance beeps
continuously.
The maximum power
setting for certain cooking
modes is very low.
I cannot switch to a
different cooking mode
during cooking.
The fan works but the
appliance has not started
cooking.
Codes on the Message
display
The display freezes There is no cookware on
and shows a the cooking plate or the
flashing '!' cookware is not suitable
for the induction cooker.
E1 Unstable voltage in
power supply network
E2 The cooking plate has
overheated.
Solution
You have selected the Hot pot cooking mode. You can only adjust the
cooking time in the Quick start (manual) mode and in the preset Stew,
Soup/Congee, Steam-Hi, Steam-Lo, Stir fry, Boil and Keep warm cooking
modes.
The light is defective. Take the appliance to your Philips dealer or a service
centre authorised by Philips.
You have selected the Quick start (manual) mode or the preset Hot pot,
Stir fry, Boil or Keep warm cooking mode. You can only use the timer in
the Stew, Soup/Congee, Steam-Hi and Steam-Lo cooking modes (see
the 'Default and adjustable settings' table in chapter 'Using the appliance').
The light is defective. Take the appliance to your Philips dealer or a service
centre authorised by Philips.
In the Stew and Soup/Congee modes, the appliance first brings the food
to the boil and then switches to a lower power level. You can only adjust
the power level after the boiling stage.
You have put unsuitable cookware on the cooking plate or you
have removed the cookware from the cooking plate during cooking.
Place suitable cookware on the cooking plate.
In the Stew and Soup/Congee modes, the appliance first brings the food
to the boil and then switches to a lower power level. You can only adjust
the power level after the boiling stage.
You cannot switch to a different cooking mode during cooking. If you
want to select a different cooking mode, press the Power on/off button to
switch off the cooker. Then press the Power on/off button again to switch
the cooker back on.
You have to press the Start button within 1 minute after you press the
Power on/off button.If you do not press the Start button within 1 minute,
the induction cooker switches off and the fan continues to work for 1
minute to cool down the appliance.
What you should do
Place suitable cookware on the cooking plate.
Check if the voltage in your home is suitable for the
induction cooker.
Switch off the appliance and unplug it. Let it cool
down for approx. 10 minutes and then switch on the
appliance again.
EnglisH
1