3.8
Playback
3.8.1 Playing back images
1. Turn the power on, and set the camera to the playback mode.
•
The most recently captured image appears on the LCD monitor.
•
If there are no images stored, the message
2. Press the four-way control.
•
[
] displays the previous image.
•
[
] displays the next image.
• Holding down [
3.8.2 Playing back movie clips
1. Turn the power on, and set the camera to the playback mode.
2. Press [ ] or [
3. Start playing back.
•
Press [
•
Press
resume.
• During movie playing back, press [
• While pausing video playback, you can press the shutter to capture the video frame as a
still image in the VGA format.
3.8.3 Magnifying & trimming still images
1. Turn the power on, and set the camera to the playback mode.
2. Select an image.
•
Press [
] or [ ] to select the image that you want to magnify or trim.
•
Only still images can be magnified and trimmed.
3. Magnify the image.
•
Press
You can use the four-way control to view different parts of the magnified image.
•
Press
•
Press
4. Trim the image.
•
Press
5. Save the image.
•
Press
20
Using the Camera
] or [
] scrolls images at high speed.
] to select a movie clip that you want to playback.
] to start playing the movie clip.
to stop the movie clip, or press [
] to fast forward or press [
to magnify the image, and the central portion of the image is displayed.
to zoom-out.
to return to the normal size.
to set the image trimming.
again to trim the selected image and save it as a new one.
appears.
[No image]
] to pause it. Press [
] to rewind it.
] again to