Capturing Movie Clips; Capturing Audio Clips - BenQ DC C1060 User Manual

Menu item Functions
Battery Type To ensure the camera displays battery level correctly, set the type
to match the batteries used. Carbon-Zinc batteries are not
recommended.
[Alkaline]
[NiMH]
[Lithium]
[Oxyride]
Reset All Resets the entire menu and button operation settings to initial
default.
The following settings do not change after Reset All:
Date & Time setting
Language setting
TV out setting
Battery Type
3.5

Capturing movie clips

1. Turn the power on, and set the camera to the Movie mode.
2. Compose the subject on the monitor.
• Aim the focus area the subject.
• The LCD monitor displays the available capturing time.
3. Start capturing.
• Press the shutter button to start capturing.
• Use the zoom button to adjust the image size.
• The White Balance is set and locked to the settings of the first frame.
• Sound cannot be captured while pressing the zoom button.
• You can use optical zoom in movie capturing.
• With the internal memory or a slow-speed SD card, a video can be captured only at 15 fps
(frames per second) (C850 only).
4. Finish capturing.
• Press the shutter again to end capturing.
• The camera will stop capturing automatically when the memory capacity has been
reached.
3.6

Capturing audio clips

1. Turn the power on, and set the camera to the voice capture mode.
2. Press the shutter button to start capturing.
• Audio is captured from the microphone of the camera. Be careful to avoid touching
the microphone while capturing.
3. Press the shutter button again to end capturing.
• The camera will stop capturing automatically when the memory capacity has been
reached.
When using alkaline batteries.
When using NiMH batteries.
When using Lithium batteries.
When using Oxyride batteries.
Using the Camera 15