4. Press [
] / [
] to select an option and press
close the menu, and then press the shutter button to take pictures.
Icon
Drive mode
-
Off
2 sec.
2
10 sec.
10
Double
Burst
3.3.7 Using the zoom function
Your camera has a combination of optical and digital zoom functions that allows you to
zoom in on far away subjects or zoom out for a wide angle shot.
The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital
zoom enlarges or shrinks the image using a software process.
1. Make the zoom setting, and point the camera at the subject.
2. Press the zoom button (
: zoom out for a wide-angle shot.
: zoom in for a telephoto shot.
•
When the zoom button is pressed, the zoom bar appears on the LCD monitor.
•
When the optical zoom factor is at maximum, zooming stops temporarily. Press
again, the camera switches to the digital zoom automatically and zooming continues.
•
You can use optical zoom in movie capturing.
3. Press the shutter button to take a picture.
4. To turn digital zoom on or off:
•
Press
, and then press [
•
Press [
] / [
submenu.
•
Press [
] / [
to close the menu.
Description
Captures a single image.
The shutter release will be delayed for 2 seconds.
The shutter release will be delayed for 10 seconds.
Performs delay and capture twice:
1.
Performs a 10-second delay, then captures an image.
2.
Performs another 2-second delay, then captures an image
again.
Keep pressing the shutter button fully for continuous shooting.
Release the shutter button to stop shooting.
/
) to compose the image.
] / [
] to select the capture menu.
] to select Digital Zoom and then press [
] to select On or Off and press
to apply the setting. Press
] or
to launch the
to apply the setting. Press
Using the Camera
to
9