Assembly; Unpacking; Assembling - Fakir THEO Instructions For Use Manual

en

Unpacking

Assembling

1
10

ASSEMBLY

Unpack the appliance and check the contents for complete-
ness (see "scope of delivery").
Sort the packaging material and recycle accordingly.
If you notice any transportation damage, please contact
your dealer immediately.
WARNING!
Never use a defective appliance.
WARNING!
Prior to assembly, make sure that the mains plug is unplug-
ged. If the mains plug is plugged in, the appliance could ac-
cidentally be switched on, resulting in injuries.
1. Suction hose
Press the connecting piece (1) at the end of the suction
hose into the air intake opening (2) of the vacuum cleaner.

2
NOTICE!
To release the suction hose squeeze both locking parts and
pull the suction hose from the air intake opening.
2. Suction hose / Telescopic suction tube
Insert the handle (1) of the suction hose into the telescopic
tube (2) with a slight turn.
3. Nozzles / Hand tube resp. Telescopic suction tube
Insert the required nozzle (3) with a slight turn onto the
handle of the suction hose, or onto the telescopic suction
tube (4).
4. Setting the length of the suction tube
Use your thumb to press the slide element (1) in the di-
rection of the arrow.
Hold the lower part of the tube in your other hand and pull
or push the suction tube to the required length.
The vacuum cleaner is now ready for use.