Creating A Recording - Casio Privia PX-S1000 User Manual

Creating a Recording

• If, during a recording operation, the number of
remaining recordable notes is 100 or fewer, the
indicator of the track being recorded (L or R) will start
to flash more quickly. Recording stops automatically
when the number of remaining recordable notes
becomes 0.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
• You cannot use keyboard operations to configure
settings while in record standby or while recording is
in progress.
■ Quick Guide: Simplest performance recording
operation
1.
While the 70 (REC) button is lit white, touch
70 (REC).
This enters record standby, which is indicated by flashing
70 (REC) (red) and 6 a (white) lights.
2.
To start recording, play something on the
keyboard.
This causes the 70 (REC) (red) light to change from
flashing to lit, which indicates that recording is in
progress.
3.
When you are finished recording, touch 70
(REC) or 6 a.
This makes 70 (REC) light white again.
4.
To replay the recording, touch 6 a.
• The above operation records what is played on the
keyboard to the left-hand part track. For further operation
details, see "To record the left-hand part
EN-27).
■ To record the left-hand part track
1.
2.
3.
4.
5.
6.
Restarting Recording From the Beginning
• If you make a mistake and want to stop an ongoing
track" (page
Depending on the track to be recorded,
configure the applicable settings.
• See "Recorded MIDI
• If you want to specify a beat and tempo setting, refer to
the information below and configure the settings.
"To change the metronome
"Specifying the Tempo" (page EN-21)
While the 70 (REC) button is lit white, touch
70 (REC).
This enters record standby, which is indicated by flashing
70 (REC) (red) and 6 a (white) lights.
• At this time, the "L" indicator starts to flash. This
indicates that the left-hand part track will be recorded.
• To exit a recording operation here, touch 70 (REC).
This makes 70 (REC) light white again.
If you want the metronome to sound during
recording, touch 5 METRONOME.
To start recording, play something on the
keyboard, press the pedal or touch 6 a.
This causes the 70 (REC) light (red) to change from
flashing to lit.
When you are finished recording, touch 70
(REC) or 6 a.
This makes 70 (REC) light white again.
To replay the recording, touch 6 a.
recording operation and restart recording from the
beginning, hold down 70 (REC) until its light flashes.
This discards everything you have recorded to the left-hand
track and returns to record standby. Perform the operation
from step 4 of the above procedure to restart recording.
Digital Piano Operations
Data" (page EN-26).
beat" (page EN-20)
EN-27