Configuring Settings
Factory Reset (Initialization)
You can use the procedure below to return the Digital Piano's stored data and settings to their initial factory defaults any time you
want.
A0
A0
1.
Hold down 3 FUNCTION.
2.
Press the A0 keyboard key.
This enters factory reset standby and causes the 3 FUNCTION light to flash.
• Step 3 below will execute the initialization operation. If you want to cancel initialization at this point, release
3 FUNCTION.
3.
To execute initialization, press the C1 keyboard key.
This starts initialization.
4.
Release 3 FUNCTION.
• The initialization operations takes some time to complete. Wait until initialization is complete. All front panel touch button
lights (3 FUNCTION to 9 ELEC. PIANO) light when initialization is complete.
EN-36
C1
C2
C3
C1
C4
C5
C6
C7
C8