Waterpik WP-560 Quick Start Manual

QUICK START GUIDE
1
FIRST USE
Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
Magnetic
Attachment
3
LEAN OVER SINK
Close lips enough to prevent splashing,
while still allowing water to flow from
mouth into the sink.
Model WP-560/562/563/564/565/566
This device is compatible with voltages of 100-240VAC, 50/60 Hz
Fill reservoir with
warm water.
Insert
Insert tip firmly until
it clicks into place.
Review full instruction book prior to use
4
TECHNIQUE
Aim water just above the gumline at a 90 degree
angle. Follow the gumline and pause briefly
between teeth.
2
START WATER FLOSSING
Press mode button to
adjust pressure. Start with
the lowest setting and
increase to your liking.
TO AVOID MESS:
PLACE THE TIP
IN YOUR MOUTH
BEFORE TURNING
UNIT ON
© 2017 Water Pik, Inc.
1.800.525.2774 (USA) 1.888.226.3042 (Canada)
English