Advertisement
Quick Links
QUICK START GUIDE
Cordless Advanced 500 Series
1
Unit Prep
A. Charge unit for 4 hours
by placing the magnetic
charger on the front of
the unit.
This device is only compatible with voltages of 100-240VAC, 50/60Hz
Magnetic
Attachment
Fill
Insert
B. Insert tip until it clicks
into place. To remove tip,
push the tip eject button.
C. Lift the flip top on
reservoir and fill with warm
water. Refill as needed.
Caution:
Do not press
tip eject
button while
unit is running.
©2019 Water Pik, Inc.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Waterpik Water Flosser 500 Series
Summary of Contents for Waterpik Water Flosser 500 Series
- Page 1 QUICK START GUIDE Cordless Advanced 500 Series Unit Prep Insert Caution: Magnetic Do not press Attachment tip eject button while unit is running. A. Charge unit for 4 hours B. Insert tip until it clicks by placing the magnetic into place. To remove tip, charger on the front of push the tip eject button.
- Page 2 QUICK START GUIDE Cordless Advanced 500 Series Water Floss Mode A. Lean over sink. Place B. Start on low pressure and tip in mouth. Close lips increase to your liking. Keep enough to prevent unit upright during use to splashing. Turn power ensure continuous water flow.
Need help?
Do you have a question about the Water Flosser 500 Series and is the answer not in the manual?
Questions and answers