Mercedes-Benz GLS 2020 Operator's Manual page 103

% If the driver's seat position calculated by the
vehicle is not practical or comfortable, it can
be changed manually at any time via the
control buttons.
The outside mirrors are not set via this func‐
tion. Instead, they have to be set manually
via the switches.
%
You can also make these settings via the
Mercedes me portal for your user profile. By
synchronizing the profiles in the vehicle and
the Mercedes me connect profiles, you can
carry over these settings for your vehicle.
Further information about synchronizing user
profiles ( page 299).
/
Setting the easy entry and exit feature
Activate or deactivate the function.
#
% If you use an individual user profile and have
set your body size, this information is carried
over for the easy entry and exit feature. This
causes the driver's seat to automatically
move into the correct position
( page 298).
/
Selecting the massage program for the front
seats
Multimedia system:
© Comfort Massage
4 5 5
Select Wave Massage or Pulsating
#
The selected program will start.
Start the program for the desired seat ;.
#
To set the massage intensity: switch
#
Intensity on or off.
Resetting seat settings
Multimedia system:
© Comfort Seat Comfort
4 5 5
Select Reset.
#
Select ß for the desired seat.
#
The settings for the selected seat are reset.
Switching the seat heating on/off
& WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
Massage.
cause the seat cushion and seat backrest
padding to become very hot.
The health of persons with limited tempera‐
High
ture sensitivity or a limited ability to react to
high temperatures may be affected or they
may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it is
switched on repeatedly.
* NOTE Damage to the seats caused by
objects or documents when the seat
heating is switched on
When the seat heating is switched on, over‐
heating may occur due to objects or docu‐
Seats and stowing 101