Check the Mute group box to add the channel to a group. Muting any channel within the Mute group mutes all channels in
the group.
Fader Groups
Check the Fader group box to add the channel to a group. All faders within the group are linked, and move together when a
single fader is adjusted.
Logic Switch Indicator
Illuminates when a switch logic signal is received by the Audio Network Interface from a microphone.
Note: only applies to block connector model.
Logic LED Indicator
Illuminates when an LED logic signal is received by the Audio Network Interface through the network from a control system.
Note: only applies to block connector model.
Parametric Equalizer
Maximize audio quality by adjusting the frequency response with the parametric equalizer.
Common equalizer applications:
•
Improve speech clarity
•
Reduce noise from HVAC systems or video projectors
•
Reduce room irregularities
•
Adjust frequency response for reinforcement systems
Setting Filter Parameters
Adjust filter settings by manipulating the icons in the frequency response graph, or by entering numeric values. Disable a filter
using the check-box next to the filter.
Filter Type
Frequency
Gain
Q Width
Only the first and last band have selectable filter types.
Parametric: Attenuates or boosts the signal within a customizable frequency range
Low Cut: Rolls off the audio signal below the selected frequency
Low Shelf: Attenuates or boosts the audio signal below the selected frequency
High Cut: Rolls off the audio signal above the selected frequency
High Shelf: Attenuates or boosts the audio signal above the selected frequency
Select the center frequency of the filter to cut/boost
Adjusts the level for a specific filter (+/- 30 dB)
Adjusts the range of frequencies affected by the filter. As this value increases, the bandwidth
becomes thinner.
Shure Incorporated
15/27