Taco Marine GS-850 Installation Instruction Manual

Mounts for antenna
Hide thumbs Also See for GS-850:

Advertisement

Quick Links

TACO Marine® Grand Slam Mounts
GS-850 & GS-950 Mounts
INSTALLATION INSTRUCTION GUIDE
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS-850 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Taco Marine GS-850

  • Page 1 TACO Marine® Grand Slam Mounts GS-850 & GS-950 Mounts INSTALLATION INSTRUCTION GUIDE ®...
  • Page 2 GS-8 Kit Contents Required, but not included • SAFETY GLASSES Grand Slam 850 mount • (for both the GS-850 and GS-950) DRILL & SCREW GUN • MASKING TAPE & PENCIL • 1/4" DRILL BIT • Drill template THREE 1/4-20 FLAT HEAD SCREWS (LENGTH= (THICKNESS OF TOP) + 7/8”)
  • Page 3 -850/GS-950 Thank you for purchasing the TACO Marine Grand Slam 850 VHF Antenna Mount or Grand Slam 950 Anchor & Stern Light! As a family-owned and operated business since 1959, we take pride in offering the highest-quality, innovative products with excellent customer service.
  • Page 4 GS-950 MOUNT INSTALLATION FOR ANCHOR & STERN LIGHT 1. Use the drill template to mark and drill with a 1/4" bit the three bolt holes. 2. If your top requires spacers, trim the included vinyl spacers to the depth of your hardtop thickness.
  • Page 5 Using a standard flathead screwdriver, remove the set screw (A) located on the side of the GS-850 and GS-950 base while holding the Antenna or Anchor & Stern Light shaft, being careful not to let the shaft fall. Once the screw is removed, gently lift up on the shaft and reposition the Antenna or Anchor &...
  • Page 6: How To Use

    How to use When boating with the Grand Slam 850 or Grand Slam 950, easily adjust the top-moun- ted VHF Antennas or Anchor & Stern Light with the simple push of a button. Once either accessory is mounted to the top and wired into the control panel, lift or des- cend the accessories by pressing the up or down buttons.
  • Page 7: Wiring Diagrams

    WIRING DIAGRAMS WIRING SWITCH SCHEMATIC (FIGURE 1) 2.5 amp 2.5 amp fuse 2.5 amp fuse fuse MOTOR CONNECTION (FIGURE 2) Motor Connection Motor Connection Motor Connection Lower Limit (White) +12 VDC (Red) Lower Limit (White) +12 VDC (Red) Lower Limit (White) +12 VDC (Red) Motor + (Green)) Motor - (Black)
  • Page 8 WIRING DIAGRAMS ANCHOR AND STERN LIGHT (FIGURE 4) Port Blinds are to the rear of centerline Stern Starboard Black Red Stern Red Bow Ground Light Light 8 / GS- 85 0 & GS - 950 MOUNTS...
  • Page 9: Product Dimensions

    PRODUCT DIMENSIONS 4.25 1.73 DOWN POSITION 4.25 1.73 6.93 6.93 DOWN POSITION DOWN POSITION 1.00 1.00 4.60 UP POSITION 3.20 4.60 3.20 6.54 UP POSITION 6.54 UP POSITION 4.25 1.73 4.25 1.73 DOWN POSITION 4.25 1.73 41.58 41.58 DOWN POSITION 41.58 DOWN POSITION DOWN POSITION...
  • Page 10: Drill Template

    GS-850/GS-950 Drill Template Please print at 100 percent for accurate sizing. Slight scaling may still occur. Therefore, before drilling, it is recommended that all template dimensions be measured for accuracy. 1 0 / GS - 85 0 & GS - 950 MOUNTS...
  • Page 11: Need Support

    We’re here to help. Need Support? Contact Us 1.800.653.8568 support@tacomarine.com tacomarine.com 50 NE 179th ST Miami, FL. 33162 @tacomarine @taco_marine TACO Marine ® GS-8 50 & G S-950 MOU NTS / 11...
  • Page 12 ®...

This manual is also suitable for:

Gs-950

Table of Contents