Related Manuals for Taco Marine GS-380
Summary of Contents for Taco Marine GS-380
- Page 1 TACO Marine® Grand Slam Mounts GS-380 / 380XL Outrigger Mount INSTALLATION INSTRUCTION GUIDE ®...
-
Page 2: Kit Contents
5/16" x 18" x 1" bolts or • MARINE-GRADE SEALANT 5/16" x 18" x 5" bolts • STAINLESS LOCK NUTS & STAINLESS ACORNS (GS-380 XL ONLY) 5/16" x 18" hex nuts Nylon washers & stainless washers Hex bolt for rotator handle ®... -
Page 3: Installation
GS-380/380XL Thank you for purchasing the TACO Marine Grand Slam 380 or 380XL Outrigger Mount! As a family-owned and operated business since 1959, we take pride in offering the highest-quality, innovative products with excellent customer service. We stand behind our products 100 percent. If you have any questions about this mount or installation, please contact us by visiting tacomarine.com/contactus. - Page 4 INSTALLATION USING A SOLID PLATE Always use high-quality, stainless-steel hardware when mounting the base. Do not attempt to weld the base to any surface. 1. Before drilling your bolt holes, cut out a 3-1/8" diameter center hole. 2. When you are finished drilling your 3-1/8" hole, set the base in the hole being careful not to scratch the anodized finish of the lower components, or to damage the white angle height position indicator.
-
Page 5: How To Use
How to use When boating with the Grand Slam 380 or 380XL, easily raise and lower outrigger poles by turning the crank handle – either clockwise to lift or counterclockwise to lower. For going under bridges, trailering or storage, we recommend lowering the outriggers to ensure they don't get damaged. -
Page 6: Technical Specs
TECHNICAL SPECS Place a few drops of marine-grade oil here to lubricate seals #1) 5/16"-18 X 1" Stainless Steel Cap Screw #2) 8mm Stainless Steel Flat Washer #3) 5/16" Nylon Washer Extrusion Plate Top Mount Orientation Mount orientation on top with locking pin facing outboard •... -
Page 7: Drill Template
GS-380/380XL Drill Template GraND Slam 4" X 6" Drill TemplaTe Note: Please print at 100% for accurate sizing. Due to the nature of printing, slight scaling may still occur. GS-280/2801 Drill TemplaTe Therefore, before drilling, it is recommended that all template dimensions are measured for accuracy and rechecked using the drilling template only as a guide. -
Page 8: Need Support
We’re here to help. Need Support? Contact Us 1.800.653.8568 support@tacomarine.com tacomarine.com 50 NE 179th ST Miami, FL. 33162 @tacomarine @taco_marine TACO Marine ® 8 / GS-380 / 38 0 XL OUTR IG GE R MOU NT...