Philips HR7805/04 User Manual page 10

®
Blender accessory
Important
• The blender accessory can only operate if
the bowl with cover and the blender jar have
been placed correctly.
• Never attempt to process food in the
blender jar and in the foodprocessor bowl
simultaneously.
• Before use: do not insert the plug into the
wall socket until the blender jar with blade
unit and lid are correctly mounted on to the
motor unit.
• After use: remove the mains plug from the
wall socket before detaching the blender jar
from the motor unit.
• This accessory is suitable for very fine
blending and puréeing. (E.g. soups, sauces,
milkshake, baby food, vegetables, fruit, thin
batters, paté.) If necessary, cut solid
ingredients into smaller pieces before
putting into the blender jar.
• Do not fill with ingredients hotter than 80° C
(approx. 175° F).
• To prevent spillage, do not overfill.
Maximum jar capacity for liquids is
(= approx. 0.9 pint).
• Never remove the lid while the blender is
operating.
Assembling
37
- Position the rubber sealing ring on the rim of
the blade unit (fig. 37).
- Mount the blade unit on to the jar by turning it
firmly (!) anti-clockwise until locked (fig. 38).
39
2
1
- Unscrew the covering plate (fig. 39).
- Turn the jar clockwise until locked (fig. 40).
1 ⁄ litre
2
38
1
2
40
- Place the lid onto the
jar (fig. 41).
For disassembling
proceed in reverse.
Tips:
• Liquid ingredients (e.g.
oil for the preparation
of mayonnaise) can be
added through the
small aperture in the
stopper when placed
upside down (fig. 42).
• The opening in the lid
can be used for adding
ingredients when the
motor is running.
Unlock the stopper by
turning (fig. 43).
• If blending is
prolonged the results
will generally be finer.
• From time to time, it
may be necessary to
interrupt the blending
and remove particles
sticking onto the jar.
First set the switch to position O and unplug.
Then remove the lid.
Use a soft spatula. Keep this at a safe distance
(approx. 2 cm or 1") from the blades.
10
41
42
43