Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
WDR Digital Sensor Color Camera
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunt Electronic HTC-T65GWD
Summary of Contents for Hunt Electronic HTC-T65GWD
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Table Of Contents
■ Contents Menu Flow Features ■ Setup Page Menu ㆍ PRESETS Precautions ㆍ LENS ㆍ WDR Components and Accessories ㆍ WHITE BALANCE Overview ㆍ AGC (Auto Gain Control) ㆍ DNR (Digital Noise Reduction) ■ Front View ㆍ SENS-UP ■ Side View ㆍ... -
Page 3: Features
■ Features Warning ■ The camera requires periodic inspection. High Resolution Colour for Crisp, VIDEO / DC Drive Lens Contact an authorized technician to carry out the inspection. Clear Video The video drive lens and the DC drive lens ㆍProgressive image capture can be selected by the touch of a switch. -
Page 4: Precautions
■ Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera pointed extreme temperature conditions. environment where the humidity is high. it to physical shocks. directly at strong light. -
Page 5: Components And Accessories
■ Components and Accessories Overview ■ Front View ① 1. COLOR BOX CAMERA 2. Auto Iris Lens Connector Plug ② ③ 3. C-Mount Adapter ① Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. ②... -
Page 6: Side View
■ Overview Side View Bottom View ⑤ ④ ⑤ Tripod Mounting Bracket Screw Hole ④ Auto Iris Lens Connector Used to fix the camera onto a bracket or tripod. Used to connect Auto Iris Lens plug. The screw sizes for this hole are as follows: 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197"... -
Page 7: Rear View
■ Overview Installation Procedures ■ Lens Rear View ⑧ The lens is not supplied with this camera. Purchase a lens suitable for the environment. This camera accepts an auto iris lens, and both C-and CS-mount lenses. ⑨ Note ⑥ • It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera. -
Page 8: ㆍUsing A C/Cs Mount Lens
■ Installation Procedures Using a C/CS mount lens Before installing a lens, identify whether the lens to be installed is a C-Mount 3. Remove the cover of the Auto Iris Lens connector plug and solder the lens cable to the connector pins of the plug. or CS-Mount. -
Page 9: Connecting To A Monitor
■ Installation Procedures • Using a C-Mount Lens Connecting to a Monitor 1. Remove the protective cover at the front of this product and fit Connect the video output terminal located on the rear of the camera the C-Mount Adapter, turn it clockwise to install it. to the Monitor/DVR. -
Page 10: Connecting To Power
■ Installation Procedures Connecting to Power Control via RS-485 Interface Since power specifications differ depending on the model, make sure to check The camera can be controlled by using an external controller equipped with your model name and specifications before connecting power. RS-485 communications. -
Page 11: Menu Flow
■ Menu Flow Menu Flow ■ Setup Page Menu Special Page Menu SETUP SPECIAL PRESETS WD NORMAL CAMERA ID NORMAL ON.. ID, Position INDOOR DAY&NIGHT AUTO.. OUTDOOR FLUOR1.. FLUOR2.. COLOR LENS DC.. FLIP VIDEO.. HORIZ MANUAL VERT BOTH AUTO HIGH DZOOM USER.. -
Page 12: Setup Page Menu
■ Menu Flow Setup Page Menu ■ Advanced Page Menu PRESETS ㆍWD Normal : WD Normal environment. SETUP PRESETS WD NORMAL WD NORMAL PRESET NORMAL ADVANCED SETUP > RETURN INDOOR H-Extra High/Shutter Pri OUTDOOR VIDEO STANDARD NTSC.. Preference = Highlights FLUOR1.. -
Page 13: ㆍLens
■ Setup Page Menu Setup Page Menu ■ LENS WHITE BALANCE White Balance is a function which compensates different colors of light being emitted from different light sources. SETUP ㆍLENS Choose the lens type DC, Video Users can select the above levels as they desire according to the environment. PRESETS WD NORMAL and Manual lens by using the... - Page 14 ■ Setup Page Menu Setup Page Menu ■ SENS-UP Automatic Gain Control is a feature which adjust automatically according to the Sens-up helps maintain a bright, clear screen image by automatically detecting incoming Signal. By positioning the arrow to 'AGC' on the SETUP menu with the changes in the level of light in low light level conditions.
-
Page 15: ㆍ Day & Night
■ Special Page Menu Special Page Menu ■ CAMERA ID DAY & NIGHT User can enter a unique name for the respective camera. This camera has a function that automatically selects the mode that is appropriate The maximum length of the ID is ten characters. for daytime or night-time conditions. -
Page 16: ㆍ Privacy Mask Setup
■ Special Page Menu Special Page Menu ■ DZOOM PRIVACY MASK SETUP Digital P/T/Z are used to create a zoom lens effect. Zoom Factor (1X to 4X) Hide an area you want to hide on the screen. Pan(±100%, center of image can be moved to left and right edges of screen) Tilt(±100%, center of image can be moved to top and bottom edges of screen) SPECIAL SPECIAL... - Page 17 ■ Advanced Page Menu Advanced Page Menu ■ VIDEO STANDARD BACKLIGHT Choose video system between PAL and NTSC by moving the selector. Backlight is feature of a Camera which compensates when there is a large amount of background light. NTSC ADVANCED SETUP ㆍWhen Backlight is ON, Back Light SETUP...
-
Page 18: ㆍ Rs485 Setup
■ Advanced Page Menu Advanced Page Menu ■ SHARPNESS RS485 SETUP The outline of the video image becomes cleaner and more distinctive as the level This function sets up the camera communication status when controlling the camera of SHARPNESS increases. If the level gose up excessively, however, it may through an external control device. -
Page 19: Troubleshooting
■ Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an Problem Solution authorized technician. The Motion Detection • Check that MOTION DET in the SPECIAL SETUP Problem Solution is not set to 'OFF'. -
Page 20: Specifications
■ Specifications MEMO ■ ITEM NTSC 12VDC Only (Max.160mA) Power Consumption 24VAC/12VDC (Max.170mA/250mA) Image Sensor PIXIM 1/3" C-MOS BELUGA Sensor Effective Pixels 720 (H) x 540 (V) Dynamic Range 120dB (Max), 102dB (Typical) Horizontal Resolution 540TV Lines Scanning Frequency Horizontal : 15.734 KHz, Vertical:59.94 Hz Horizontal : 15.625 KHz, Vertical:50.00 Hz Min. - Page 21 ■ MEMO...
-
Page 22: Color Camera
Modle : HTC-T65GWD WDR Digital Sensor Color Camera Instruction Guide Modle : HTC-T65GWD WDR Digital Sensor Color Camera Printed in KOREA BELUGA...
Need help?
Do you have a question about the HTC-T65GWD and is the answer not in the manual?
Questions and answers