Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
Floor vertical installation
In case of floor installation with plinths, for these refer to the individual instruction sheets provided and the relevant
manual. Use the paper template, and mark on the wall the position of the two fixing brackets (Fig.1) Drill using a
suitable bit and insert the plugs (2 per bracket) (Fig.2 ref. A); fix the two brackets (Fig.2 ref. B). Do not overtighten
the screws, so as to be able to adjust the brackets with a spirit level (Fig .3) . Secure the two brackets by tightening
the four screws . Check the stability by manually moving the brackets to the right and left, up and down . Fit the unit,
ensuring correct hooking on the brackets and its stability (Fig .4) .
Fig. 1
Fig. 2
A
B
A
B
Fig. 3
Fig. 4
11
Advertisement
Chapters
Table of Contents
