Advertisement
EN
|
Cleaning
-
Always unplug the appliance before removing accessories or
cleaning the motor unit.
-
You can quickly and easily clean the food processor bowl and
blender jar by means of the clean button. Simply put some water
and a few drops of washing-up liquid in the dirty bowl or jar,
secure the lid and press the clean button until the bowl or jar is
clean.
-
When cleaning the food processor bowl in this way, make sure
either the blade or the kneading accessory has been assembled in
the bowl.
-
To clean the balloon beater, pull the beater out of the gear housing.
Then open the housing by pulling the latch sideways and take out
the two gearwheels. Clean the gearwheels and the beater in hot
water with some washing-up liquid.
-
The gearwheels and the beater can also be cleaned in the
dishwasher.The gear housing can be wiped with a moist cloth.
-
The adjustable slicing disc, the slicing insert and the adjusting knob
can be cleaned in hot water with some washing-up liquid or in the
dishwasher.Turn the adjusting knob to the right and pull the slicing
insert out of the disc before cleaning it.
Cleaning of the meat mincer
The meat mincer is not dishwasher-proof.You can rinse it under the
tap.
-
Remove any meat left in the cutter housing by passing pieces of
bread through it.
-
Switch off the appliance and unplug it.
-
Remove the pusher and the tray.
-
Unscrew the screw ring and remove the grinding disc, the cutter
unit and the worm shaft.
-
Remove the cutter housing by pressing the release button and
turning it to the right.
-
Detach the gear housing by turning it to the right.
-
Clean all parts with hot water and some washing-up liquid.
-
Rinse them under a hot tap and dry them immediately with a tea
towel.
PL
|
Essence
49
Advertisement
