Advertisement
EN
|
Blender - tips and warnings
Never open the lid when the appliance is still running!
◗
Built-in safety lock: you can only use the blender when the rib on
the blender jar is directly opposite the print on the motor unit.
-
To add liquid ingredients during processing, pour them into the
blender jar through the hole in the lid.
-
Pre-cut solid ingredients into smaller pieces before processing
them.
-
If you want to prepare a large quantity, process small batches of
ingredients instead of a large quantity at once.
-
Soak hard ingredients, e.g. soy beans, in water before processing
them.
-
Use cooked ingredients when blending a soup.
-
When processing a liquid that is hot or tends to foam (e.g. milk),
do not put more than 1 litre in the blender jar to avoid spillage.
-
If you are not satisfied with the result, switch the appliance off and
stir the ingredients with a spatula, remove some of the contents to
process a smaller quantity or add some liquid.
If ingredients stick to the wall of the blender jar:
1
Switch the appliance off and unplug it.
2
Open the lid and use a spatula to remove the ingredients from
the wall of the jar.
Always unplug the appliance before reaching into the blender jar
with your fingers or an object (e.g. a spatula).
B
Note that it is not possible to use the food-processing functions when
the blender is attached to the motor unit!
PL
|
◗
B
RO
|
Blender - sugestii şi avertismente
◗
Essence
31
Advertisement
