Sprint S1000R User Manual page 19

Subnet Mask
Starting IP
Ending IP
Edit
Lan Interface Details
SSID
Default DMZ Server
Apply
Advanced Settings
On the WiFi Advanced Setup page you can configure some WiFi advanced parameters such as Beacon
Interval, Transmit Power and Block DFS channel. Generally, no configuration change is required on this
page.
Parameter
Configuring the S1000R Router
The configured subnet mask for the router in the SSID
This is calculated by the router based on the IP Address.
Format: <A.B.C.D> Default: 255.255.255.0
The starting range of the reserved pool of IP Addresses
for this SSID.
The ending range of the reserved pool of IP Addresses
for this SSID.
Click this button to edit the configuration for the SSID.
NOTE: All parameters described above apply to the
SSID for the Local Area Network (LAN).
When checked, the IP Address for this "Demilitarized
zone" is the default server. The IP Address can be
configured.
NOTE: Use this cautiously, as there are security issues
associated with a DMZ server.
Click this button to commit the configuration.
Description
17