Intended use Inspection and repairs Before use, check the appliance for damaged or defective Your BLACK+DECKER VM1680, VM1880, VM2080 vacuum parts. Check for breakage of parts, damage to switches cleaners have been designed for dry vacuum cleaning and any other conditions that may affect its operation.
risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised BLACK+DECKER Service Centre in order to avoid a hazard. ...
Page 8
ENGLISH (Original instructions) Disconnecting the hose (fig. A) Crevice attachment (15) Press and hold the hose release buttons. The crevice tool (15) allows for vacuuming in narrow and Pull the hose connector (10) out of the air intake duct (16) hard-to-reach places.
Note: Only ever clean the pre filter with clean water do not Should you find one day that your BLACK+DECKER product use soap or detergent. Dry the filter naturally. Do not dry it by needs replacement, or if it is of no further use to you, do not heat otherwise it will distort.
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...
Need help?
Do you have a question about the VM1680 and is the answer not in the manual?
Questions and answers