Table of Contents
Advertisement
®
Invacare
Action3 NG RC
3 Wheel Brakes
WARNING
On steep slopes you can lose braking control of your wheelchair and overturn. Do not
take slopes exceeding 4°to ensure perfect braking control of the wheelchair.
3.1
Adjusting Wheel Brakes
NOTE: When changing the size of the central wheels (24" or 22"), the wheel brakes MUST be
readjusted.
NOTE: Before adjusting or replacing the wheel brake assemblies, ensure that the tires are inflated to
the recommended BAR, KPa, P.S.I on the side wall of the tire.
NOTE: For this procedure, refer to FIGURE 3.1.1
B
10 mm
FIGURE 3.1.1
3.1.1
Pre-adjusting Wheel Brake Shoe Position (step 1)
NOTE: For this procedure, refer to FIGURE 3.1.2, next page
1.
Remove the central wheel. Refer to section 2.1 Removing/Installing Central Wheels.
2.
The hand brake lever must be in forward position.
3.
Pre-adjust the distance around 10mm with the adjustment nut A (8mm spanner).
4.
Securely tighten the fixation nut B (8 mm spanner).
5.
Repeat STEPS 1 to 4 for the opposite side.
12
A
D
E
C
Advertisement
Table of Contents
