Features; Rear Panel - ION Total PA Glow 2 Quick Start Manual

Features

Rear Panel

1. Media Panel: Button controls for the USB/SD, FM radio (if
applicable), and Bluetooth audio sources. These controls
include mode selection and playback options. See
Panel below for more information.
Note: A USB drive or SD card must contain playable files
in order for it to appear properly in the media panel's
display. You can play MP3s, 16-bit WAVs, FLAC, APE, and
WMA files.
2. USB Port: Connect your USB flash drive here to play
music. You can also use this port for charging a USB
device.
3. SD Card Slot: Insert your SD card here to play music.
4. Display: Shows the Media Panel modes: USB/SD, FM
radio (if applicable), and Bluetooth. The icon for the
currently selected mode will be illuminated on the Display.
Note: The Display comes with a plastic protector on it.
Remove this for optimal viewing.
5. Mic Inputs (1/4"/6.35 mm & XLR): Connect a dynamic
microphone to the 1/4" (6.35 mm) or XLR inputs. Control
the volume of the inputs using the Mic Input Volume
knobs.
6. Mic Input Volume: Turn this knob to adjust the input
volume of the Mic Input.
7. Aux Input (1/8"/3.5 mm): Connect a CD player, digital
media player, or other audio source to this 1/8" (3.5 mm)
stereo auxiliary input. Control the volume using the Aux
Input Volume knob.
8. XLR Input (XLR): Connect a line-level mixer or musical
instrument to this XLR line-level input. Control the volume
using the Aux Input Volume knob. Use this line-level input
when linking together two Total PA Glow 2 units.
9. RCA Inputs: Connect a CD player, digital media player,
mixer, or other media source to these inputs. Control the
volume using the Aux Input Volume knob.
10. Aux Input Volume: Turn this knob to adjust the input volume of the Aux Input, XLR Input, and RCA
Inputs.
11. Mix Out (XLR): Connect this XLR output to another active (powered) speaker. The level of the output is
controlled by the Mic Input Volume, Aux Input Volume, and Master Volume.
12. Mic Echo: Use this knob to increase or decrease the echo effect on the Mic Inputs.
13. High EQ: Increases or decreases the high (treble) frequencies for the Mic Inputs, Line Inputs, and
Media Panel audio sources at a range between -12 dB to +12 dB.
14. Low EQ: Increases or decreases the low (bass) frequencies for Mic Inputs, Line Inputs, and Media
Panel audio sources at a range between -12 dB to +12 dB.
15. Master Volume: Turn this knob to adjust the overall output volume of the loudspeaker.
Media
1
6
5
5
11
3
4
2
6
10
12
7
5
13
9
5
14
15
8
18
17 16
19
5