Front Panel Features; Cd Player Features - ION iCD02K Owner's Manual

deck or CD recorder. The level of the record
output is based upon pre-master levels.
Master Output (RCA): This output is for
5.
connecting an external monitoring device
such as a PA system, powered monitors, or a
home stereo. The level of the master stereo
output signal is controlled by the master
fader.
Mic Input: Plug your 1/4" Microphone plug
6.
in here.
Input Fader: Controls individual source
1.
levels in the mix.
Input toggle switch - Selects which
2.
source will be live to that channel based on
what you have connected to the rear panel
input section
Replaceable Crossfader - Achieves clean
3.
segues between the two input channels.
"Hard left" selects Channel 1. "Hard right"
selects Channel 2. With the crossfader
centered, both assigned channels are live.
Use the crossfader for fast and seamless
segues from one selected channel to the
other
Note: The crossfader is user replaceable in
case of failure. Simply unscrew the two
large screws which hold it in place, lift it
out and disconnect it's cable. Re-attach the
new crossfader and screw the mounting
plate back onto the unit - you're back in
business!
OPEN/CLOSE (Disc Tray Open/Close) -
1.
Press to load or eject the disc. Each press
will open or close the disc tray on the
transport. NOTE: Tray will not open unless
the disc has been paused. Tray will
automatically close after 30 seconds.
7.
8.
3

FRONT PANEL FEATURES

4.
5.
6.
7.
8.
9.
10.
11.
12.
13.

CD PLAYER FEATURES

2.
3.
AC In: This mix station is designed to work
with the power supply cord that comes with
the unit. While the power is switched off,
plug the power supply into the mix station
first, then plug it into the outlet.
Power Switch: Use this switch to turn on
the mix station after all input devices are
already connected to prevent damage to
your equipment. Turn the station on before
you turn on amplifiers and turn off amplifiers
before you turn off the mix station.
Fader Start – Activation allows you to
start the CD players from you crossfader.
Travel from left to right will start the right
CD player and pause the left CD player
Mic Input Fader – Adjusts microphone
level.
Mic On/Off Toggle – Activates
microphone.
Master Fader - Controls the overall output
level.
Vocal Cancel/Stereo/Mono toggle -
Changes the Master output between Mono
and Stereo, and vocal cancel.
Stereo EQ – Adjust final master output
equalization of treble, middle, and bass.
LED METER - Indicates the Master output
level.
Channel Cue Selector - Used to route
channel audio to your headphones.
Headphone Level – Adjusts cue volume.
Headphone Jacks – Used to connect
either 1/8" or 1/4" plugs for audio
monitoring with headphones.
TIME (Time Button) - Switches the time
display between elapsed playing time and
remaining time on the track and remaining
time on the entire CD.
CONT/SING - Will cause just a single
track to play or all tracks in order by
pressing once or twice.