Yolink YS7804-UC User Manual page 15

Un-pairing
Find the controller(Master) motion sensor. Hold
the set button for 10-15 seconds, the light will
flash red quickly.
Find the responder(Receiver) action device.
Hold the power/set button for 10-15 seconds,
the device will enter the un-pairing mode.
The above two devices will unpair by themselves
and the light stops flashing.
After unbundling, when the motion is detected,
the responder will no longer turn on.
Responder List
YS6602-UC YoLink Plug
YS6604-UC YoLink Plug Mini
YS5705-UC In-wall Switch
YS6704-UC In-wall Outlet
YS6801-UC Smart Power Strip
YS6802-UC Smart Switch
Continuously updating ..
SET BUTTON
13