Philips FC6055/01 Instructions For Use Manual page 13

Problem Cause
The nozzle is
clogged.
Dust The filter holder has
escapes not been placed
from the properly in the dust
appliance. compartment.
The filter holder has
not been placed in
the dust
compartment at all.
The filter is not in
the correct position.
The dust
compartment is full.
The The dust
appliance compartment is full.
does not
suck up
liquid.
Liquid leaks The filter is wet.
from the
appliance.
The filter has not
been installed.
The filter holder is
not in the correct
position.
Solution
Remove the obstruction from
the nozzle.
Reinsert the filter holder (see
chapter 'Cleaning').
Place the filter holder in the dust
compartment (see chapter
'Cleaning')rtment.
Fasten the filter in the filter
holder by turning it clockwise
and put the filter holder into the
dust compartment.
Empty the dust compartment
(see chapter 'Cleaning').
Empty the dust compartment
(see chapter 'Cleaning').
The filter must be dry before
you place it back into the
appliance.
Install the filter before switching
the appliance on to suck up
liquid.
Place the filter holder in the
correct position.
English
1