Table of Contents
Advertisement
Available languages
Available languages
English
1
Problem
The
appliance
does not
clean floors/
the suction
power is
low.
Cause
The contact strips on
the appliance and on
the charging unit are
dirty.
The adapter has not
been inserted
(properly) into the
wall socket.
If this problem is not
caused by any of the
factors mentioned
above, please contact
the Philips Customer
Care Centre in your
country.
The dust
compartment is full.
The batteries are not
fully charged.
The filter is dirty.
Solution
Push the on/off slide backward
to put it in the 'off ' position.
Make sure the slide is in the 'off '
position during charging.
Wipe the dirt off the contact
strips with a dry cloth.
Insert the adapter into the wall
socket (properly).
Empty the dust compartment
(see chapter 'Cleaning').
Charge the appliance (see
chapter 'Preparing for use').
Clean the filter and the filter
holder (see chapter 'Cleaning').
Advertisement
Table of Contents
