Philips HI835/22 User Manual page 11

Assistance guide
Problem
After switching on for the first time,
some smoke comes from the iron.
The iron does not steam and you hear
a loud noise from the stand.
There is no
water spray.
There is no
'Shot-of-steam'.
Likely cause
This is normal.
Some parts of the iron have been
greased lightly in the factory.
The water level is too low,
the anti-calc cassette is not properly
inserted and/or the temperature is
less than 2.
The internal water
reservoir (P) is empty.
The internal water
reservoir (P) is empty.
11
What to do?
Nothing.
After a short while
this phenomenon will stop.
Fill the watertank to the
MAX indication, insert the
anti-calc cassette by
pushing it, and/or select a
higher temperature with the
temperature dial (A).
Fill the watertank to the
MAX indication, set
temperature to 3 and
push steam trigger (C) until
steam comes out of the
sole.
Fill the watertank to the
MAX indication, Set
temperature to 3 and
push steam trigger (C) until
steam comes out of the
sole.