Install Bracket - Kannad 406 AF-COMPACT Quick Installation Manual

1. Drill 4 holes Ø 6 mm in the aircraft structure according to "Drilling mask" (Refer to § 2. ELT Drilling
Mask, page 502 of installation manual). Inner holes (1, 2, 3, 4) shall be preferred.
2. If the aircraft structure is not solid enough to withstand a 500 kg traction on the bracket, a
reinforcement plate (not supplied) should be installed as shown figure hereunder.
3. Fix the bracket with the 4 screws, 8 washers and 4 nylstop nuts supplied.
IMPORTANT: tighten to a torque between 4 and 5 Newton x meter.
PAGE 4

3. INSTALL BRACKET

QUICK INSTALLATION GUIDE KANNAD 406 AF-COMPACT