ONE K73-8M Concise User Manual page 37

Wireless Display
Wireless Display (Miracast) uses your Wireless LAN
module/WLAN/Bluetooth Combo module (you need to
make sure that your video adapter/display device is com-
patible with your particular WLAN/Combo module) in
conjunction with a compatible video adapter/display
device (purchased separately) to allow you to display the
contents of the notebook display on another display (e.g.
HDTV), without the need to have cables stretching across
a room. You can then play games, browse the internet, dis-
play videos or photo slide shows on your TV/external dis-
play without using HDMI or A/V cables.
Before configuring Wireless Display you will need to set
up your compatible adapter with your display. Connect
the adapter using an HDMI or A/V cable and turn on the
display, and then set the display to the appropriate input
channel (see the documentation supplied with your com-
patible adapter for full details).
Wireless Display Configuration
1. Note that no driver or application is required for wireless display
in Windows 10.
2. Press the + P (or Fn + F7) key combination.
3. An on-screen menu will pop up.
4. Click Connect to a wireless display (see sidebar if this does
not appear).
5. The system will then search for compatible display devices (this
may take up to 60 seconds so allow time for this to complete).
6. Double-click any detected display device in the list.
7. The display will then connect (for specific settings for your
display see the documentation supplied with your compatible
adapter/display for full details).
8. Press the + P (or Fn + F7) key combination, click Connect
to a wireless display and then click Disconnect to temporarily
disconnect from the wireless display.
AC/AD WLAN Module - Connect to a Wireless Display
When an AC/AD WLAN module is installed you may find
that the "Connect to a wireless display" item at the bottom
of the Project screen does not appear. In this case you will
need to disable one of the wireless adapter items as fol-
lows:
1. Click the icon in the notification area of the taskbar.
2. Select "Open Network and Sharing Center".
3. Click "Change adapter settings" in the menu on the
left.
4. Right-click "WiFi# - Qualcomm Atheros Sparrow
11ad Wireless Network Adapter".
5. Select Disable to turn off this adapter.
6. Return to the Project menu and click "Connect to a
wireless display".

33