ONE K73-8M Concise User Manual page 21

CPU (System Monitor)
You can adjust the CPU setting by adjusting the sliders for
the CPU Ratio Override, then click Save to retain the
setting changes.
Memory (System Monitor)
You can adjust the Memory setting by clicking the
DIMM Profile for Default, XMP1 or Custom (you can
then adjust individual settings), then click Save to retain
the setting changes.
GPU (System Monitor)
The GPU setting can be used to adjust the GPU Core In-
crement and Memory Increment by means of the slid-
ers, then click Save to retain the setting changes.

Overclocking Issues
Note overclocking the system (CPU/Memory/GPU) by mak-
ing alterations to clock frequency and/or voltage may cause
hardware damage, reduce system stability, the useful life of
the system and affect system data integrity. Therefore over-
clocking the system is enabled at the user's own risk, and is
not covered in the warranty terms.
Overclocking should only be enabled when powered by a
plugged-in adapter, and not on battery power. A warning
message will appear when you have activated CPU/Memo-
ry/GPU overclocking, click OK to activate the changes or
click Cancel to return to the previous settings.
Resetting the System In Case of Errors
If you get any system errors, to reset the computer you can
press and hold the power button to force the system to
shutdown. To restart press and hold the power button
while holding down the Fn + D key combination (for the
CPU reset) or Fn + G (for the GPU reset). This will change
the overclocking settings back to the disabled state.
17