Display Devices - ONE K73-8M Concise User Manual

Display Devices

Note that you can use an HDMI cable connected to the
HDMI-Out port and/or Mini DisplayPort compatible ca-
ble connected to a Mini DisplayPort 1.3 to connect an ex-
ternal display. You can also use the Thunderbolt port
connected to a compatible display device (see
bolt Port for Display on page
play device's manual to see which formats it supports.
4 Connected Displays
Note that when 4 displays are connected, only 2 displays
may be configured in Duplicate mode.
Configuring the Displays in Windows
All external and internal displays (up to 4 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external dis-
play(s) to the appropriate
port, and turn it(them) on.
2. Press the + P (or Fn
+ F7) key combination.
3. Click on any one of the
options from the menu to
select PC screen only,
Duplicate, Extend or
Second screen only.
28
Thunder-
13). See your external dis-

Figure 20
Project
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Right-click the desktop and select Display settings from the
menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 4 displays from the Multiple displays
menu.
Figure 21
Display (Multiple
displays)