SY HDS41A-18G User Manual

SY HDS41A-18G User Manual

4k 18g hdmi 2.0 4x1 switcher with arc

Advertisement

Quick Links

User Manual

SY-HDS41A-18G
4K 18G HDMI 2.0 4x1 Switcher
with ARC
4 Input HDMI Switcher
with
De-Embedded Audio and ARC support
SY Electronics Ltd, 7 Worrall Street, Salford, Manchester, M5 4TH, United Kingdom
Tel: +44 (0) 161 868 3450 –
www.sy.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDS41A-18G and is the answer not in the manual?

Questions and answers

Summary of Contents for SY HDS41A-18G

  • Page 1: User Manual

    User Manual SY-HDS41A-18G 4K 18G HDMI 2.0 4x1 Switcher with ARC 4 Input HDMI Switcher with De-Embedded Audio and ARC support SY Electronics Ltd, 7 Worrall Street, Salford, Manchester, M5 4TH, United Kingdom Tel: +44 (0) 161 868 3450 – www.sy.uk...
  • Page 2 The SY-HDS41A-18Gis a four-input, single-output HDMI 2.0 video switcher with both manual and auto selection modes. This switcher is useful for switching up to four HDMI sources to a single display device. The switcher can be controlled manually from the front panel, the RS232 interface, or the IR remote controller (included).
  • Page 3: Manual Selection Mode

    Connect up to 4 HDMI video sources to the HDMI INPUT connectors with a HDMI cable from the HDMI source device to the HDMI input of the SY-HDS41A-18G. Connect a HDMI cable from the HDMI output of the SY-HDS41A-18G to the HDMI display device.
  • Page 4: Edid Management

    (for example: 2ch). Power up the SY-HDS41A-18G and connect the SERVICE USB port to a PC. The PC will then open a file explorer window with the name BOOTDISK that contains the file READY.TXT.
  • Page 5: Rs232 Commands

    Refresh the BOOTDISK folder and repeat from step 3, to program any further EDID locations. Once the Custom EDID locations have been programmed, disconnect the SY-HDS41A-18G from the PC. Select the desired Custom EDID location by setting the EDID switches on the rear of the SY- HDS41A-18G as given in Table 1. RS232 Commands...
  • Page 6 CEC Device Control The SY-HDS41A-18G also provides control of any CEC enabled devices connected to HDMI inputs 1 to 3 only. Only the currently selected input (except HDMI4) will output the CEC commands. Each of the commands given in the following tables are sent to the RS232 port, The SY-HDS41A-18G will output the appropriate CEC messages, when an RS232 command from below tables is received.
  • Page 7: Specifications

    Figure 1 – SY-HDS41A-18G Connection Diagram Specifications Video HDMI Resolutions 480i, 480p, 720i, 720p, 1080i, 1080p, 1920 x 1200, 4Kx2K@60Hz 4:4:4 HDMI Standard HDMI 2.0 3D Support Deep Colour Support HDR Support Input HDCP Standards 1.4 and 2.2 Output HDCP Standards 1.4 and 2.2...
  • Page 8: Safety Instructions

    Damage to the product due to incorrect usage or storage  Damage caused by unauthorised repairs  Damage caused by mistreatment of the product 5. Please direct any questions or problems you may have to your local dealer before contacting SY Electronics. sy.uk V1.2...

Table of Contents