Makita 9067 Technical Information page 4

R
epair
1. Replacing Spiral bevel gear (in replacing, if there is a trouble in Ball bearing, it should be replaced too)
1) Remove Depressed center wheel and Wheel cover.
2) Remove Tapping screw CT5x16 fixing Bearing box.
Disassemble or assemble as the following illustrations;
Disassemblig
IR 217
2. Assembling of Bearing box
When assembling, be careful so that grease may not stick to Tapping screw bind CT5x16.
Press Spindle
by Arbor press
Receive Ring using U
part of Arbor press
Tapping screw bind CT5x16
Height: 15mm(5/8")
or more
Assembling
Outside diameter
40mm or less
Inside diameter
20mm or more
Spiral Bevel Gear 49
for 9067/9067S
Spiral Bevel Gear 50
for 9069/9069S/9067L
Bearing box
Labyrinth ring
Press-fit deeply being
careful not to damage it
IR030
Ø17.2mm