Table of Contents
Advertisement
Quick Links
LON RTS Module 433 MHz WM
LON RTS Module 447 MHz WM
Somfy Activites SA
50 Avenue du Nouveau Monde
74300 Cluses
France
www.somfy.com/projects
animeo LON RTS Module 433/447 MHz . Ref. 51318943A
Functional Profile
SOMFY animeo®
Ref. 1860239
SOMFY animeo®
Ref. 1860240
Version 1.02
Revision date: 2016/12/20
Ref. 5118943A
Functional Profile LON RTS Module WM
Date: 27.09.17
1/44
Advertisement
Table of Contents
Related Manuals for SOMFY animeo LON RTS Module 433 MHz WM
Summary of Contents for SOMFY animeo LON RTS Module 433 MHz WM
- Page 1 Ref. 1860239 SOMFY animeo® LON RTS Module 447 MHz WM Ref. 1860240 Version 1.02 Revision date: 2016/12/20 Ref. 5118943A Somfy Activites SA 50 Avenue du Nouveau Monde 74300 Cluses France www.somfy.com/projects animeo LON RTS Module 433/447 MHz . Ref. 51318943A 1/44...
-
Page 2: Table Of Contents
Date: 27.09.17 Functional Profile LON RTS Module WM Table of Content Document History ........................ 4 Hardware ..........................5 Node Object #0000 ....................... 6 3.1. Overview ........................6 3.2. Functional-Block Details .................... 7 3.3. Network Variables ..................... 9 3.3.1. Request Input ......................9 3.3.2. - Page 3 Push button configuration of the radio transmitter ........... 42 6.2. Push button configuration of the radio transmitter ........... 43 6.3. SOMFY RTS Transmitter compatible with ............... 44 6.3.1. LON RTS Module 433 MHz .................. 44 6.3.2. Situo RTS Pure 433 MHzLON RTS Module 447 MHz .......... 44 animeo LON RTS Module 433/447 MHz .
-
Page 4: Document History
Date: 27.09.17 Functional Profile LON RTS Module WM 1. Document History version Modification reason validity date First Version 03.12.2014 1.01 Appendix added 09.01.2015 1.02 Device “LON RTS Module 09.06.2015 433MHz” added animeo LON RTS Module 433/447 MHz . Ref. 51318943A 4/44... -
Page 5: Hardware
Date: 27.09.17 Functional Profile LON RTS Module WM 2. Hardware The device has three LEDs and one button. The latter and the yellow LED are used for service purpose as defined by F. The green LED signals the operation of the power supply. The orange LED signals the state of the radio receiver. -
Page 6: Node Object #0000
3. Node Object #0000 UFPTnodeObject #0000 Overview 3.1. The SOMFY Node Object inherits all mandatory and some optional members from the LonMark Node Object # 0000. Various SOMFY specific members have been added. The Node Object functional profile describes a special type of functional block—called the Node Object functional block—that is used by network tools to test and manage all... -
Page 7: Functional-Block Details
Date: 27.09.17 Functional Profile LON RTS Module WM Functional-Block Details 3.2. animeo LON RTS Module 433/447 MHz . Ref. 51318943A 7/44... - Page 8 Date: 27.09.17 Functional Profile LON RTS Module WM Table 1 SNVT Details Variable Name SNVT/UNVT Name SNVT/UNVT Description (M/O)* Index 1 (M) nviRequest SNVT_obj_request Requests a particular mode for a particular functional block in the device 2 (M) nvoStatus SNVT_obj_status Reports the status of the requested functional block in the device...
-
Page 9: Network Variables
Date: 27.09.17 Functional Profile LON RTS Module WM Network Variables 3.3. 3.3.1. Request Input network input SNVT_obj_request nviRequest; This input network variable provides the mechanism to request an operation or a mode for a functional block within a device. For a listing of all possible request codes, and for the meaning of the function codes for SNVT_obj_request, see the SNVT Master List. - Page 10 Date: 27.09.17 Functional Profile LON RTS Module WM RQ_UPDATE_STATUS Requests the status of the specified functional block to be sent to the nvoStatus output network variable. The state of the functional block is unchanged. A RQ_ UPDATE_STATUS request that specifies the Node Object functional block is a request for the status of the device and all functional blocks on the device.
-
Page 11: Status Output
Date: 27.09.17 Functional Profile LON RTS Module WM 3.3.2. Status Output network output SNVT_obj_status nvoStatus; This output network variable reports the status for any functional block on a device. It is also used to report the status of the entire device and all functional blocks on the device. -
Page 12: File Directory
Date: 27.09.17 Functional Profile LON RTS Module WM Configuration Considerations None. When Transmitted The output variable is transmitted when either of the following conditions occurs: A request is received by the nviRequest input network variable. Default Service Type The default service type is acknowledged. 3.3.3. -
Page 13: Programming Mode
Date: 27.09.17 Functional Profile LON RTS Module WM When Transmitted The output variable is transmitted when either of the following conditions occurs: During file transfer When polled Default Service Type The default service type is unspecified. Network tools may wish to poll this network variable for values. -
Page 14: Configuration Properties
Date: 27.09.17 Functional Profile LON RTS Module WM Configuration Properties 3.4. 3.4.1. Location Label (optional) SCPTlocation cp_family nciLocation; This configuration property identifies the subsystem containing the device. It provides a more detailed description of the device location than can be provided by the Neuron Chip’s 6-byte location string. -
Page 15: Device Minor Version
Date: 27.09.17 Functional Profile LON RTS Module WM The major version number is incremented when the network interface for the device changes. Valid Range Any integer number from 0 to 255. Default Value The default value is zero. Configuration Requirements/Restrictions Read only. -
Page 16: Radio Control #3200
Date: 27.09.17 Functional Profile LON RTS Module WM 4. Radio Control #3200 Overview 4.1. The SOMFY Radio Control inherits all mandatory and some optional members from the LonMark Switch Object # 3200. Various SOMFY specific members have been added. -
Page 17: Functional-Block Details
Date: 27.09.17 Functional Profile LON RTS Module WM Functional-Block Details 4.2. animeo LON RTS Module 433/447 MHz . Ref. 51318943A 17/44... - Page 18 Date: 27.09.17 Functional Profile LON RTS Module WM Table 1 SNVT Details Variable Name SNVT Name SNVT Index Description (M/O)* 1 (M) nvoSwitch SNVT_switch Switch output value linked to Up/Down/My radio buttons 2 (O) nviSwitchFb SNVT_switch Switch feedback input 3 (O) nvoSetting SNVT_setting Setting output...
-
Page 19: Network Variables
Date: 27.09.17 Functional Profile LON RTS Module WM Network Variables 4.3. 4.3.1. Switch Output network output SNVT_switch nvoSwitch; This output network variables provides the switch output linked to the radio buttons. The Up-button switches on, the Down-button switches off and the My-button toggles the output. -
Page 20: Setting Output
Date: 27.09.17 Functional Profile LON RTS Module WM 4.3.3. Setting Output network output SNVT_setting nvoSetting; When blinds are controlled by a controller, such as a sunblind controller, the setting output is used to change the mode and/or the setpoint of the controller. The controller can be turned ON or OFF and the setpoint can be adjusted. -
Page 21: Configuration Properties
Don’t forget to save the received address (es)! )! After a timeout of one hour the device aborts the learning. See nciTransmitterAddr. To learn in the address of a Somfy RTS device nviLearnAddr_n has to be set to 0. Configuration Properties 4.4. -
Page 22: Long Operation
Date: 27.09.17 Functional Profile LON RTS Module WM Default Value 0xFF000000 (raw value) Configuration Requirements/Restrictions Values above the valid range and duplicates in one device are rejected. For verification compare to nviLearnAddr. If a transmitter address is learned (see above nviLearnAddr) this value should be read from device in order to store its value in the LNS data base. -
Page 23: Setting Up
Date: 27.09.17 Functional Profile LON RTS Module WM Valid Range The valid range of SNVT_setting. Default Value SET_DOWN, INVALID, INVALID. SNVT Reference SNVT_setting #117 4.4.5. Setting Up network input config UCPTsettingUp nciSettingUp Values which are sent via nvoSetting if up command has been received. Valid Range The valid range of SNVT_setting. -
Page 24: Step Angle
Date: 27.09.17 Functional Profile LON RTS Module WM 4.4.7. Step Angle network input config UCPTstepAngle nciStepAngle Angle which is used in setting to tilt blinds up or down if Long Operation time was not exceeded. Valid Range The valid range is 0 to 180,0 degrees. Default Value The default value is 0,0 degrees. - Page 25 Date: 27.09.17 Functional Profile LON RTS Module WM SNVT Reference SNVT_level_cont #21 Configuration Considarations Only valid with Telis Modulis (wheel) TILTING and Telis (long press) DIMMING See also chapter 6. Appendix animeo LON RTS Module 433/447 MHz . Ref. 51318943A 25/44...
-
Page 26: Analog Sensor #0001
The Analog Sensor inherits all mandatory and some optional members from the LonMark Analog Sensor Object # 0001. Various SOMFY specific members have been added. The Functional Block “Analog Sensor” exists 3 times in the animeo LON RTS Module. Each could be set individually and separately from the others. -
Page 27: Functional-Block Details
Date: 27.09.17 Functional Profile LON RTS Module WM Functional-Block Details 5.2. The Functional Block “Analog Sensor” exists 3 times at the animeo LON RTS Module. Each could be set individually and separately from the others. animeo LON RTS Module 433/447 MHz . Ref. 51318943A 27/44... - Page 28 Date: 27.09.17 Functional Profile LON RTS Module WM Table 1 SNVT Details Variable Name SNVT Name Description (M/O)* 1(M) nvoValue_x changeable Value of used Analog sensor * M = mandatory, O = optional Table 2 SCPT Details (M/O) SCPT SCPT Name Associated NVs** Description Index...
-
Page 29: Network Variables
Date: 27.09.17 Functional Profile LON RTS Module WM Network Variables 5.3. 5.3.1. Analog Sensor Output x network output SNVT(SCPTnvType) nvoValue_x; This output network variable reports the value of the sensor which is connected via 12- bit A/D-converter to the corresponding analog input (all one- and two-byte integer values plus SNVT_switch and SNVT_occupancy are supported). -
Page 30: Example: Co2 As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM Valid Range nvoValue of following type categories are supported: • NVT_CAT_UNSIGNED_SHORT e. g. SNVT_lev_cont • NVT_CAT_SIGNED_LONG e. g. SNVT_temp • NVT_CAT_UNSIGNED_LONG e. g. SNVT_Wm2_p • NVT_CAT_STRUCT: only SNVT_switch • NVT_CAT_ENUM: only SNVT_occupancy Default Value SNVT_lux, PID 0:0:0:0:0:0:0:0, Scope 0, Index 79, NVT_CAT_UNSIGNED_LONG, 2 bytes,... -
Page 31: Example: Temperature As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM 5.4.1.2. Example: Temperature As Analog Sensor network input config SCPTnvType nciNetworkType = SNVT_temp_p; This input configuration property sets the temperature value in degree Celsius (°C) at the following network variables: • nv1 – nvoValue_x Valid Range of Analog Sensor Output -273.17 …... -
Page 32: Example: Watts Per Square Meter As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM Valid Range of Analog Sensor Output 0 = OC_OCCUPIED 1 = OC_UNOCCUPIED Default Value of Analog Sensor Output -1 = OC_NUL 5.4.1.5. Example: Watts per square meter As Analog Sensor network input config SCPTnvType nciNetworkType = SNVT_Wm2_p This input configuration property sets the global radiation value in W/m²... -
Page 33: Min Send Time
Date: 27.09.17 Functional Profile LON RTS Module WM SCPT Reference SCPTmaxSendTime (49) 5.4.3. Min Send Time network input config SNVT_time_sec nciMinSendTime; This input configuration property sets the minimum period of time that must expire before the Object will automatically (cyclically) update one of the following network variables: •... -
Page 34: Example: Send On Power Delta
Date: 27.09.17 Functional Profile LON RTS Module WM 5.4.4.1. Example: Send On Power Delta network input config SNVT_power nciSndDelta; This input configuration property sets the change of value in Watt that must result before the Object will automatically update the following network variables: •... -
Page 35: Example: Send On Brightness Delta
Date: 27.09.17 Functional Profile LON RTS Module WM Default Value 1 °C (Degree Celsius) 5.4.4.4. Example: Send On Brightness Delta network input config SNVT_lux nciSndDelta; This input configuration property sets the change of value in Lux that must result before the Object will automatically update the following network variables: •... -
Page 36: Example: Watts Per Square Meter As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM 5.4.4.7. Example: Watts per square meter As Analog Sensor network input config SCPTnvType nciNetworkType = SNVT_Wm2_p This input configuration property sets the change of value in W/m² that must result before the Object will automatically update the following network variables: •... -
Page 37: Example: Electric Voltage As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM Divisor = 1 SCPT Reference SCPTgain (31) E.g. you would like to use a brightness sensor (sun sensor) with a measurement range from 0 lux to 100000 lux and a resolution with 1 lux =>... -
Page 38: Example: Brightness As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM Multiplier 20,0 / 0,1 = 200 5.4.5.2. Example: Brightness As Analog Sensor network input config SCPTnvType nciNetworkType = SNVT_lux; This input configuration property sets the brightness value into lux at the following network variables: •... -
Page 39: Example: Analog Sensor Offset Co2
Date: 27.09.17 Functional Profile LON RTS Module WM This input configuration property defines a linear global radiation sensor in combination with NV nciGain_[x] in range of the following network variables: • nv1 – nvoValue_x Valid Range 0.0 … 6553.5 W (Resolution 0.1W) Default Value 0 W (Watt) 5.4.6.2. -
Page 40: Example: Analog Sensor Offset Brightness
Date: 27.09.17 Functional Profile LON RTS Module WM 5.4.6.4. Example: Analog Sensor Offset Brightness network input config SNVT_lux nciOffset; This input configuration property defines a linear brightness sensor in combination with NV nciGain_[x] in range of the following network variables: •... -
Page 41: Example: Watts Per Square Meter As Analog Sensor
Date: 27.09.17 Functional Profile LON RTS Module WM Default Value OC_OCCUPIED 5.4.6.7. Example: Watts per square meter As Analog Sensor network input config SCPTnvType nciNetworkType = SNVT_Wm2_p This input configuration property sets the global radiation value into W/m² at the following network variables: •... -
Page 42: Appendix
Date: 27.09.17 Functional Profile LON RTS Module WM 6. Appendix: Push button configuration of the radio transmitter 6.1. Blinds Dimming UP button Long press Move SettingUp Brighter Scroll_Step Short press Tilt Step_Angle Switch_On “my” button Long press Move Setting my Toggle On/ Off Short press Stop... -
Page 43: Push Button Configuration Of The Radio Transmitter
Date: 27.09.17 Functional Profile LON RTS Module WM Push button configuration of the radio transmitter 6.2. Blinds Dimming UP button Long and Move Setting_Up Switch On short press “my” button Long press Move Setting_my Toggle On/ Off Short press Stop Setting_Stop DOWN Long and... -
Page 44: Somfy Rts Transmitter Compatible With
SOMFY RTS Transmitter compatible with 6.3. 6.3.1. LON RTS Module 433 MHz; #1860239 The following Somfy RTS remotes with a frequency of 433 MHz are compatible with the LON RTS Module 433 MHz WM, Ref. 1860239: Telis 1 RTS 433 MHz...
Need help?
Do you have a question about the animeo LON RTS Module 433 MHz WM and is the answer not in the manual?
Questions and answers