SOMFY Animeo Series Manual
  1. Manuals
  2. Brands
  3. SOMFY Manuals
  4. Controller
  5. Animeo Series
  6. Manual

SOMFY Animeo Series Manual

Knx 4 dc motor controller wm
Hide thumbs Also See for Animeo Series:
Table of Contents

Advertisement

Quick Links

Download this manual
animeo KNX 4 DC Motor Controller
28.02.2019
WM 24 V DC
68
 2019 Somfy Activités SA  Ref. 5147817A
1/56
© 2019, SOMFY ACTIVITES SA . ALL RIGHTS RESERVED . REF. 5147817A – 2019/01/31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Animeo Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SOMFY Animeo Series

Summary of Contents for SOMFY Animeo Series

  • Page 1 KNX 4 DC Motor Controller 28.02.2019 WM 24 V DC  2019 Somfy Activités SA  Ref. 5147817A 1/56 © 2019, SOMFY ACTIVITES SA . ALL RIGHTS RESERVED . REF. 5147817A – 2019/01/31...

  • Page 2: Table Of Contents

    6.17 Menu index card “Radio inputs – 8-Bit value” ................49 6.18 Menu index card “Radio inputs – Dimming” ................... 51 6.19 Menu index card “Radio inputs – Venetian blind slow tilting” ............53 Technical data ..........................55  2019 Somfy Activités SA  Ref. 5147817A 2/56...
  • Page 3 Before starting up it is necessary to follow the safety instructions in these instructions. SOMFY cannot be held liable for defects and damages when these have been caused as a re- sult of not following instructions (wrong installation, incorrect service etc.). Establishing, testing and starting up of the equipment is permitted only by a qualified person (in accordance with VDE 0100).

  • Page 4: Definitions

    1 Definitions 1.1 Manual Command A manual command is a command which is generated by local conventional push buttons or by a Somfy RTS radio hand transmitter. A telegram which is sent on the objects 1-12 (bit commands) is also understood as a manual command.

  • Page 5: Position Of The Slats

    Angle: 90 ° Angle: 0 ° Angle: -90 ° Turn: 0 % Turn: 50 % Turn: 100 % KNX value: 100% KNX value: 50% KNX value: 0% Turning direction Turning direction Turning direction  2019 Somfy Activités SA  Ref. 5147817A 5/56...

  • Page 6: Installation

    WM 24 V DC 2 Installation Choose the right place for installation: Level surface with sufficient space Installation of the Motor Controller 4 DC WM Complete wiring and connect power supply  2019 Somfy Activités SA  Ref. 5147817A 6/56...

  • Page 7: Wiring Diagramm

    2 x 0.8 mm/20 AWG Required, according to KNX guidelines 6 mm/0.24’’ 24 V DC Min.: 2 x 1.5 mm /15 AWG 10 m/33 ft Max.: 2 x 2.5 mm /13 AWG  2019 Somfy Activités SA  Ref. 5147817A 7/56...

  • Page 8: Settings In The Delivery State

    ETS was programmed, or after the device was unassigned by the ETS. The basic settings are overwritten by the settings in the ETS.  2019 Somfy Activités SA  Ref. 5147817A 8/56...

  • Page 9: Selection Of Different User Ergonomics

    4.2 Selection of different user ergonomics Using the Reset/Prog button the press button user ergonomics for the local push button inputs or Somfy RTS radio hand transmitter can be determined. These settings are possible only in the delivery state, before the device is programmed with ETS software or after the device is unassigned with the ETS.

  • Page 10: Manual Learning-In Of Move Times

    Alternatively to the conventional push buttons, the settings can also be done using the Somfy RTS Trans- mitter and animeo RTS Radio Module (ref. 1860105). A setting using animeo KNX RTS Receiver (ref.

  • Page 11: Resetting To The Delivery State

    Rest/Prog button. Over the function “Unload” in the ETS, all settings of the device can be set back in the delivery state. The Reset/Prog button is then freed again.  2019 Somfy Activités SA  Ref. 5147817A 11/56...

  • Page 12: Communication Objects

    Motor 2 Slat position 1 Byte 5.001 sponding slats will move to the position which is Motor 3 Slat position 1 Byte 5.001 defined by the received value. If a Venetian blind  2019 Somfy Activités SA  Ref. 5147817A 12/56...
  • Page 13 Motor 2 Security, low prio 1 bit 1.001 ing blind moves to the position parameterized in Motor 3 Security, low prio 1 bit 1.001 the ETS parameters (Security, low prio) and any  2019 Somfy Activités SA  Ref. 5147817A 13/56...
  • Page 14 (Yes)” has been selected in the ETS parameters and both securities for the corre- sponding channel have the value “0”, the blind moves to the position it was, before any security was activated.  2019 Somfy Activités SA  Ref. 5147817A 14/56...
  • Page 15 Motor 2 IP1 Save/Delete 1 bit 1.002 If a telegram with the value “0” is received on one Motor 3 IP1 Save/Delete 1 bit 1.002 of these communication objects the IP1 is deleted.  2019 Somfy Activités SA  Ref. 5147817A 15/56...
  • Page 16 When the corresponding blinds leave the lower end position, a telegram with the value “0” is sent. The upper and lower end position is de- termined by the parameterized move times.  2019 Somfy Activités SA  Ref. 5147817A 16/56...
  • Page 17 1 contact A, 100 % is dimmed with longer pressing of the switch. When releasing the corresponding switch at the input B, a stop com- mand is generated. The last activated dimming step becomes inverted.  2019 Somfy Activités SA  Ref. 5147817A 17/56...
  • Page 18 If the Venetian blind is in a fully moving process with a short pressing of “DOWN” button at channel 1 learned in remote a stop order is generated.  2019 Somfy Activités SA  Ref. 5147817A 18/56...
  • Page 19 B with a long actuation it is dimmed 100 %. When releasing the appropriate switch at the input B a stop order is generated. The dim- ming action operated last is thus inverted.  2019 Somfy Activités SA  Ref. 5147817A 19/56...
  • Page 20 134, channel 4 instead of channel 1 165 Radio Input 4: 8-Bit value “DOWN” 1 Byte 5.010 see description of object 135, channel 4 instead button of channel 1  2019 Somfy Activités SA  Ref. 5147817A 20/56...
  • Page 21 136, channel 5 instead of channel 1 177 Radio Input 5: Dimming/slow tilting 4 Bit 3.007 see description of object 137, channel 5 instead 3.008 of channel 1  2019 Somfy Activités SA  Ref. 5147817A 21/56...

  • Page 22: Parameter

     No Default value:  No Selection options:  Yes With the parameter “Yes” the settings for the priority functions become visible. At the same time the neces- sary objects appear.  2019 Somfy Activités SA  Ref. 5147817A 22/56...
  • Page 23 17:00 on priority automatic functions tog- gles. Over the corresponding object (56-59), switching to and from priority manual function and priority auto- matic function can be done at any time. H See chapter 1 Definitions.  2019 Somfy Activités SA  Ref. 5147817A 23/56...
  • Page 24 If the value “0” is transmitted to the corresponding object (17–20), the slats are closed at maximum. value (100%) If the value “100” is transmitted to the corresponding object (17–20), the slats are turned or opened at maximum.  2019 Somfy Activités SA  Ref. 5147817A 24/56...

  • Page 25: Menu Index Card "Configuration For Motor 1

    With this parameter it is determined that the Venetian blind in EU ergonomics is selected over the local push button inputs or via the Somfy RTS radio transmitter. When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the corresponding parameters (short/long pressing of the push button).
  • Page 26 With this parameter it is determined that the corresponding blind is selected over move/stop commands when the controlling is done over the local push button inputs or via the Somfy RTS radio hand transmitter. When the local push button inputs are used as universal push button inputs, the operating ergonomics are defined over the corresponding parameters (short/long pressing of the push button).
  • Page 27 H The cyclic transmitter must be approximately 4 times faster than the cyclic monitoring. E.g. if the cyclic sending of the transmitter is set to 1 minute, then the cyclic monitoring time should be set to ≥4 minutes.  2019 Somfy Activités SA  Ref. 5147817A 27/56...

  • Page 28: Menu Index Card "Functions For Motor 1

    Motor 1…4/Motor 1 - 4. H Intermediate position 1 can be learned-in individually via conventional local push buttons or by a radio handheld transmitter per motor output. In addition, the last learned-in position applies.  2019 Somfy Activités SA  Ref. 5147817A 28/56...
  • Page 29 “1” is received on the corresponding object during a blinds move, this move is carried out up to the end. Only then are further UP/DOWN orders (bit) blocked. If a telegram with the value “0” is received on the corre- sponding object, the UP/DOWN orders (bit) are released again.  2019 Somfy Activités SA  Ref. 5147817A 29/56...

  • Page 30: General Information For Binary Inputs

    Only after completion any further commands are blocked which are gen- erated via local push button inputs or Somfy RTS radio signals. If a telegram with the value “0” is received on the corresponding object, the local push button inputs and Somfy RTS radio signals are freed again.

  • Page 31: Menu Index Card "Binary Inputs - Venetian Blind Up/Down

    Over this parameter it is defined which type of contact is at the local input B. Normally open: The contact at the local input is activated closed and not activated opened. Normally closed: The contact at the local input is activated opened and not activated closed.  2019 Somfy Activités SA  Ref. 5147817A 31/56...

  • Page 32: Menu Index Card "Binary Inputs - Switch/Dry Contact

    If a rising flank at the local input appears, the object value “On” is generated. If a rising flank at the local input appears, it is not evaluated. The duration of the activation is not evaluated.  2019 Somfy Activités SA  Ref. 5147817A 32/56...
  • Page 33 If the object value is “0”, this is transmitted cyclically. If the object value changes by flank change at the local input or reception of a telegram on “0”, the cyclic sending stops after “1”.  2019 Somfy Activités SA  Ref. 5147817A 33/56...

  • Page 34: Menu Index Card "Binary Inputs - 8-Bit Value (Rising Edge)

    With this parameter it is defined which contact type is at the local input A. Normally open: The contact at the local input is activated closed and not activated opened. Normally closed: The contact at the local input is activated opened and not activated closed.  2019 Somfy Activités SA  Ref. 5147817A 34/56...

  • Page 35: Menu Index Card "Binary Inputs - Dimming

    0.5 seconds a switch telegram is generated. 6.8.3 Input A/B  On/Off Default value:  On/Off Selection options:  Toggle/Toggle This parameter defines the value which is transmitted with a short pressing of the corresponding input.  2019 Somfy Activités SA  Ref. 5147817A 35/56...
  • Page 36 (4 bit). With a long pressing of the push button at the local input B, darker dim- ming is done over the corresponding object (4 bit). When the corresponding push button at the local input A or B is released, a stop command is generated.  2019 Somfy Activités SA  Ref. 5147817A 36/56...
  • Page 37 “interval of 0.5 seconds” is set, then with a longer pressing of the push button on the corresponding local in- put, every 0.5 seconds ¼ brighter or darker will be dimmed.  2019 Somfy Activités SA  Ref. 5147817A 37/56...

  • Page 38: Menu Index Card "General Binary Inputs

     60 telegrams per 17 sec.  100 telegrams per 17 sec.  127 telegrams per 17 sec. This parameter defines the number of the telegrams which can be transmitted within 17 seconds.  2019 Somfy Activités SA  Ref. 5147817A 38/56...

  • Page 39: Menu Index Card "Electronic Motors

     0 – 100 seconds If electronic motors are controlled using this Motor Controller, it is imperative to set the start delay time of the electronic motor in the settings of the Motor Controller.  2019 Somfy Activités SA  Ref. 5147817A 39/56...

  • Page 40: Menu Index Card "Bus Safety

     Intermediate position 1 (IP 1)  Intermediate position 2 (IP 2)  Close window  Open window This parameter defines the position which is moved to with a bus power failure.  2019 Somfy Activités SA  Ref. 5147817A 40/56...
  • Page 41 This delay time is taken into account with the start-up of the positions, which are gener- ated from the settings “Reaction with bus voltage return” and “Reaction with mains voltage return (24 V)”. Advantage: Power spikes can thus be reduced in larger projects.  2019 Somfy Activités SA  Ref. 5147817A 41/56...

  • Page 42: Menu Index Card "Feedback Motor Position

    Here, the objects in each case (81-84) and (91-94) are made available. 6.12.3 Motor 1…4 Feedback  None Default value: value (0%)  Up/Down position Selection options:  Slat position  Up/Down and slat position  None value (100%)  2019 Somfy Activités SA  Ref. 5147817A 42/56...
  • Page 43  60 seconds With this parameter it is defined in which time intervals the current position of the corresponding blinds are messaged. The current position of the blinds is transmitted on the bus.  2019 Somfy Activités SA  Ref. 5147817A 43/56...

  • Page 44: Menu Index Card "General Radio Inputs

    To illustrate this, another basis function has been selected for each radio input. The functions are described with the help of the radio input 1 (channel A) and are identical for the radio inputs 2 - 5 (channel B, C, D and E).  2019 Somfy Activités SA  Ref. 5147817A 44/56...

  • Page 45: Menu Index Card "Radio Inputs - Venetian Blinds Up/Down

     Toggle  No function • On If the “my” button in the radio transmitter is pressed, the object value “On” is generated. The duration of the activity is not evaluated.  2019 Somfy Activités SA  Ref. 5147817A 45/56...

  • Page 46: Menu Index Card "Radio Inputs - Switch

    No function If the “my” button in the radio transmitter is pressed, no object is generated. 6.16 Menu index card “Radio inputs – Switch” 6.16.1 Basic Function  Switch Selected option:  2019 Somfy Activités SA  Ref. 5147817A 46/56...
  • Page 47 H See chapter 1 Definitions for On (“1”) Off (“0”) Toggle (“1/0”). 6.16.4 Functionality of my push button  No function Default value:  1-Bit value Selection options:  8-Bit value  No function  2019 Somfy Activités SA  Ref. 5147817A 47/56...
  • Page 48 With this parameter the value (0 – 255) is set which is transmitted while pressing the “my” button in the radio transmitter. 6.16.4.3 No function If the “my” button in the radio transmitter is pressed, no object is generated.  2019 Somfy Activités SA  Ref. 5147817A 48/56...

  • Page 49: Menu Index Card "Radio Inputs - 8-Bit Value

    Default value:  1-Bit value Selection options:  8-Bit value  No function 6.17.4.1 1-Bit value  On Default value:  On Selection options:  Off  Toggle  No function  2019 Somfy Activités SA  Ref. 5147817A 49/56...
  • Page 50 With this parameter the value (0 – 255) is set which is transmitted while pressing the “my” button in the radio transmitter. 6.17.4.3 No function If the “my” button in the radio transmitter is pressed, no object is generated.  2019 Somfy Activités SA  Ref. 5147817A 50/56...

  • Page 51: Menu Index Card "Radio Inputs - Dimming

    This parameter defines the dimming step length which is transmitted as a telegram with a long pressing of the push button. 6.18.4 Functionality of my push button  No function Default value:  1-Bit value Selection options:  8-Bit value  No function  2019 Somfy Activités SA  Ref. 5147817A 51/56...
  • Page 52 With this parameter the value (0 – 255) is set which is transmitted while pressing the “my” button in the radio transmitter. 6.18.4.3 No function If the “my” button in the radio transmitter is pressed, no object is generated.  2019 Somfy Activités SA  Ref. 5147817A 52/56...

  • Page 53: Menu Index Card "Radio Inputs - Venetian Blind Slow Tilting

    Default value:  1-Bit value Selection options:  8-Bit value  No function 6.19.4.1 1-Bit value  On Default value:  On Selection options:  Off  Toggle  No function  2019 Somfy Activités SA  Ref. 5147817A 53/56...
  • Page 54 With this parameter the value (0 – 255) is set which is transmitted while pressing the “my” button in the radio transmitter. 6.19.4.3 No function If the “my” button in the radio transmitter is pressed, no object is generated.  2019 Somfy Activités SA  Ref. 5147817A 54/56...

  • Page 55: Technical Data

    -5° C to 45° C Relative humidity max. 85% Material of housing PC-ABS Housing dimensions 180 x 255 x 61 mm Weight 700 g Degree of protection IP 20 Protection class Conformity www.somfy.com/ce  2019 Somfy Activités SA  Ref. 5147817A 55/56...
  • Page 56 KNX 4 DC Motor Controller 28.02.2019 WM 24 V DC  2019 Somfy Activités SA  Ref. 5147817A 56/56...

This manual is also suitable for:

Animeo 1870452

Table of Contents