Advertisement
Advertisement
Table of Contents
Related Manuals for Hoover Essential 3110
Summary of Contents for Hoover Essential 3110
- Page 1 Upright Vacuum Cleaner 700W Motor Cyclonic Action Motorised Powerhead essential...
-
Page 3: Specifications
3110 Essential Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your vacuum cleaner. We recommend that you carefully read this instruction manual to take the best advantage of these features. Features:... -
Page 4: Before You Begin
Before You Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. -
Page 5: Safety Precautions And Warnings
Safety Precautions & Warnings IMPORTANT! Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. - Page 6 Safety Precautions & Warnings 15. To prevent electrical shock, do not use the 23. Before carrying out any maintenance service vacuum cleaner outdoors or on wet surfaces. or cleaning the filters, always switch off the vacuum cleaner and disconnect the plug 16.
- Page 7 Assembling IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories! LIVE PARTS within the powerhead. Insert the handle into the body of the machine, then secure with the screw supplied. Insert the short end of the hose into the connection hose and turn to the ‘lock’...
-
Page 8: Instructions For Use
Instructions For Use IMPORTANT: Do not operate the floor head over the power cable. Rotate the Quick Release Cable Hook to release the power cord. Secure the power cord into the Cable Hook before plugging the power plug into the mains power supply. WARNING! Seek advice from carpet manufacturers before using the motorised powerhead on woollen or delicate carpets. - Page 9 Switch the machine ON/OFF by stepping on the ON/OFF Switch. Note: the brush bar roller will operate as soon as the cleaner is switched on. Safety Precautions: Ensure to remove any power cables or loose string on the floor before cleaning to prevent damage.
- Page 10 Instructions For Use (continued) Operating the Detachable Wand IMPORTANT! Before using the detachable wand, always ensure that the cleaner is switched off and unplugged from the mains power supply. Do not attempt to change the attachments while the appliance is plugged into the mains power supply. Secure the cleaner in the upright position.
- Page 11 Accessories IMPORTANT! Always remove the power plug from the power socket before fitting or removing accessories. 3-in-1 Cleaning Tool The 3-in-1 Cleaning Tool can be used as an upholstery tool, dusting brush or crevice tool to clean furniture and hard to reach areas. To change the tool to suit your particular cleaning task simply press the button (as shown) on the crevice tool and gently pull the attachment outwards.
-
Page 12: Maintenance
Maintenance Emptying and Cleaning the Dust Bin IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Press the Dust Bin Release Button to remove the dust bin. Hold the dust bin over a rubbish bin and unclip the dust bin lid to empty the dust bin. - Page 13 Cleaning and Replacing the Filter Remove the dust bin from the cleaner by pressing the Dust Bin Release Button. Unclip the dust bin lid to access the dust bin filter. 3. The Dust Bin Filter is not washable. Note: It is recommended to replace the filter every 6 months or when it becomes visibly dirty.
- Page 14 Cleaning and Replacing the Post-Motor Filter IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Unlock the Exhaust Filter Grille by sliding the lever to the left. To maintain the performance of the cleaner, it is recommended to clean the filter after each use.
- Page 15 Cleaning the Brush Bar Roller WARNING: To reduce the risk of electric shock, ensure that the power is switched off and the power plug is disconnected from the power supply before performing any cleaning, maintenance or troubleshooting checks. Failure to do so may result in electric shock or personal injury.
- Page 16 Remove the brush bar roller base plate by using both hands to gently lift outwards. Remove the brush bar roller by lifting the right side out of the roller guides as shown. Remove the brush bar roller from the belt assembly by pulling the belt towards you and sliding the brush bar out.
-
Page 17: Troubleshooting
Troubleshooting Problems and Solutions If you come across a problem, please use this checklist before contacting Hoover Customer Care. AUS: 1300 360 845, NZ: 0800 387 442 Vacuum cleaner won’t start. Firmly plug in the power cable into the power supply, then step on the ON/Off Switch. -
Page 18: Customer Care
Customer Care Please contact Hoover Customer Care: 1300 360 845 (AUS) 0800 387 442 (NZ) to find your local spare parts provider. Description Product Code Brush Bar Roller 33788063 Belt 32100041 Filter Set 32201232... - Page 20 Upright Vacuum Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a one year Hoover Floorcare is unable to accept responsibility under this parts and labour warranty against product defects and failures when warranty for any repair work not carried out by an authorised Hoover the product is used in accordance with the terms and conditions of Service Agent or from the use of non-genuine parts.
Need help?
Do you have a question about the Essential 3110 and is the answer not in the manual?
Questions and answers
How do you reinstall the Exhaust Filter Grille. I have tried but it pops off as soon as I start the vacuum.
To reinstall the Exhaust Filter Grille on a Hoover Essential 3110 vacuum, slide the lever to lock the grille back into place before operating the cleaner.
This answer is automatically generated