Table of Contents
Advertisement
EnglisH
Press the on/off button 3.
The machine is ready for use when the indicator light is on continuously.
Place the 1-cup pod holder q in the coffee machine. Close the lid
and make sure it is properly locked.
Note: Always put a used coffee pod in the pod holder when you descale the
machine. This pod serves as a 'filter' to prevent the sieve in the pod holder from
getting clogged with scale residue.
10
Put a bowl with a capacity of at least 1.5 litres under the spout to
collect the descaling mixture.
11
Press the Calc-Clean button to start the descaling program.
During the descaling program, the machine pauses a few times to
,
remove scale deposits from the inside of the SENSEO
During the descaling program, the indicators on the control panel on
,
the lid light up sequentially to indicate that the machine is descaling.
The descaling program takes about 35 minutes. When the descaling
,
program is finished, the Calc-Clean indicator flashes rapidly.
Never interrupt the descaling process!
Never descale the SENSEO
sure the lid is properly locked.
1
Empty the water reservoir, rinse it and fill it with fresh water.
Caution: Do not refill the water reservoir with used hot water or the
used descaling mixture.
1
Press the Calc-Clean button to rinse the machine.
Note: The rinsing process takes a few minutes.
1
Remove the pod from the pod holder and clean the pod holder to
prevent the sieve in the centre from getting clogged.
15
Rinse the machine a second time by repeating steps 12 and 13.
16
Remove the Calc-Clean tool from the coffee spout. Reinsert the
Calc-Clean tool into the recess in the back of the machine.
The descaling procedure is now finished and the machine is ready to brew
coffee again.
coffee machine with the lid open. Make
®
machine.
®
Advertisement
Table of Contents
