Table of Contents
Advertisement
EnglisH
0
1
Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Put the 1-cup pod holder q or the 2-cup pod holder qq in the
machine without pod(s).
Close the lid and lock the lid lever.
Note: Make sure the lid lever is properly locked by pushing it down until it
snaps home with a click. It is not possible to flush the machine when the lid is
not properly closed.
Put a bowl (with a capacity of 1.5 litres) under the coffee spout to
collect the water.
5
Press the on/off button 3 (1) and subsequently press the 1-cup
button q and the 2-cup button qq briefly at the same time (2).
The machine fills itself with water from the water reservoir. While
this happens, water comes out of the spout. When the flushing cycle is
finished, the machine switches itself off. During the flushing cycle, the
machine produces more noise than during a regular brewing cycle.
Descaling
Note: This machine is intended for household use only. It is not intended for
professional use.
Advertisement
Table of Contents
