Canon LM-V1 User Manual page 38


PM-V1
1 Bayonet ring handles
2 PL lens contacts
3 PL lens index pin
Replacing the Lens Mount
As much as possible, replace the camera's lens mount in a clean environment free of dust. The following
procedure and illustrations explain the replacement of an EF lens mount on the camera with an EF lens
mount with Cinema Lock but the procedure is the same for a PL lens mount.
1.
Turn off the camera and remove all power sources.
• If an AC adapter is connected or battery back is
attached to the camera, remove them.
2.
Place the body cap on the camera's EF lens mount.
3.
Lay the camera on a flat surface with the lens mount
facing up.
4.
Remove the 4 lens mount fixation bolts using the hex
wrench for M3 bolts.
5.
Holding down the camera pull the camera's lens
mount straight up to remove it.
6.
Attach the EF lens mount with Cinema Lock to the
camera.
• Align the lens mount contacts on the camera and the
lens mount and push the lens mount gently down.
39
2
1
4
ADDED FUNCTIONALITY AND LENS COMPATIBILITY
3
5 6
4 Screw holes for lens mount fixation bolts (x4)
5 Bayonet ring
6 Lens mount contacts
EN