Canon LM-V1 User Manual page 39

7.
Screw in the 4 lens mount fixation bolts and
fasten them but not too tightly.
• Partially tighten the bolts removed in step 4 in a
balanced fashion in the sequence shown in the
illustration, using the hex wrench for M3 bolts.
8.
Secure the lens mount in place.
• Fasten the lens mount fixation bolts firmly in a
balanced fashion in the sequence shown in the
illustration.
Recommended torque: 80 N
Maximum torque: 100 N
• Applying a torque exceeding the maximum
torque may damage the camera and lens
mount.
• The camera is shipped with the flange back correctly adjusted.
For details about the initial thickness of the lens mount shims, see
instruction manual of the camera being used. If the flange back need to be adjusted after
replacing the lens mount, use the supplied shims as necessary.
40
·
cm
·
cm
ADDED FUNCTIONALITY AND LENS COMPATIBILITY
If necessary you can add shims also to
the top position
The camera is shipped with lens
mount shims on the right and left
Specifications in the
EN