Made In Germany - Barthelme AQUALUC C:URVE WIDE Instructions For Installation And Operation Manual

MADE IN
GERMANY.
AQUALUC C:URVE WIDE –
INSTRUCTIONS FOR INSTALLATION
AND OPERATION
Thank you for choosing this high-quality product from Barthelme!
1. GENERAL INFORMATION FOR INTENDED USE
Please read these instructions carefully prior to installation and initial operation of the LED light line
and keep in a safe place. Should you pass this LED light line on to a third party, please also include these
instructions.
This product is a high-quality flexible LED light line with protection class IP67. Amongst other things, it is
protected against diverse fuels, acids, solvents, salts, humidity and abrasion. The high quantity of copper
in the circuit paths, the current limiter and the thermal conductive coating ensure high quality and a long
lifetime.
The AQUALUC C:URVE WIDE is only to be used for lighting purposes and may not be changed or modified in
any way which is not described in these instructions. Non-observance of these instructions may inhibit the
correct functionality or cause damage to the product. In this case we do not assume any liability.
The minimum bending radius of the AQUALUC C:URVE WIDE is 20 cm.
The minimum bending radius may not be exceeded and the light line may not be bent,
Please observe the bending DIRECTION of the light line (see illustration 2).
ATTENTION
otherwise the AQUALUC C:URVE WIDE could be damaged!
Any warranty will be void in case of non-compliance.