Do you have a question about the CLEANET NAVIA and is the answer not in the manual?
Questions and answers
Ib Jørgensen
March 14, 2025
skyllearmen bevæger sig 5 mm ud og tilbage igen og så sker der ikke mere.
1 comments:
Mr. Anderson
March 14, 2025
If the Laufen CLEANET NAVIA spray arm moves 5 mm out and back but does not function further, switch off the main switch under the appliance, wait approximately 1 minute, then switch it on again. If the issue persists, contact Laufen customer services.
Cleaning plastic surfaces and metal components Suitable cleaning agents and equipment, cleaning tips Unsuitable cleaning agents and equipment Ordering consumables Descaling Changing the nozzle Changing the cover ring TROUBLESHOOTING Messages and faults DISPOSAL AND ENVIRONMENT TECHNICAL DATA CLEANET NAVIA LEGAL NOTICE...
The Laufen shower toilet cleans your bottom. Any other kind of use is not permitted. Glowing cigarettes or other burning objects must not be thrown into the WC bowl. Laufen shall not accept liability for damage that occurs as a result of connecting the appliance incorrectly, misuse, or inappropriate use.
Shower jet position Oscillation LAUFEN APP Your shower toilet can be operated easily with the Laufen app for iPhone and Android, including useful special functions. For further descriptions, see section 4.2. An active internet connection is not required. Laufen App...
4 OPERATING THE SHOWER TOILET Your Laufen shower toilet can be operated using either the controller with rotary button or via the Laufen Laufen app. Gegenüberstellung Icons Laufen Laufen Gegenüberstellung Icons Gegenüberstellung Icons Controller with Laufen Laufen rotary button Laufen Gegenüberstellung Icons...
4 OPERATING THE SHOWER TOILET REAR SHOWER While you are sitting on the shower toilet, briefly press the controller on the right side to start the rear shower. If you need to stop the shower prematurely, press the controller again. If you wish to shower again, press the controller while the shower arm is retracting at the end of the first showering procedure.
4.2.3 WATER HARDNESS K ein Icon mehr The Laufen app allows you to store the hardness of your mains water in order to ensure K ein Icon mehr K ein Icon mehr an optimum interval for the automatic descaling programme.
5 MAINTENANCE AND CLEANING CLEANING THE SEAT AND COVER UNIT The seat and cover are integrated in a single unit because of the lowering system. The seat and cover unit can be removed to make the shower toilet easier to clean. Simply lift the seat and cover to a vertical position, use a coin to release the locking screws and pull the seat and cover from the hinge at both sides.
Pointed objects such as scrapers designed for mechanical cleaning ORDERING CONSUMABLES Article no. You can order the following consumables 6 descaling tablets for 2 applications 8.9260.4.000.000.1 on www.laufen-cleanet.com or from Nozzle and cover ring 8.9260.6.000.000.1 specialist dealers. Rotary button 8.9260.8.000.000.1 Cover for descaling opening 8.9260.7.000.000.1...
5 MAINTENANCE AND CLEANING DESCALING The Laufen shower toilet incorporates an integral descaling program for descaling water-carrying components. Your appliance detects the need for descaling and informs you (red LED indicator light) accordingly. When the descaling message appears, you can continue using the shower toilet in the usual way until descaling is actually performed.
All seals on the nozzle must always be greased after cleaning. If you would prefer to replace the nozzle, replacement nozzles can be purchased from Laufen or specialist dealers. Carefully attach the cleaned or new nozzle. Press the controller while simultaneously turning it backwards, to move the shower arm backwards.
If the cover ring becomes covered in limescale or scratched, it can be replaced with a new one. Replacement cover rings can be purchased from Laufen or specialist dealers. You will require a special tool to replace the cover ring. The tool is supplied with the new cover ring.
Switch off the main switch under the appliance, wait approximately 1 minute then switch it on again. Jet is weak or no Intensity setting of shower jet Increase the intensity of the shower jet using the Laufen 4.1.1 Kein Icon mehr water emerges.
DISPOSAL AND ENVIRONMENT The Laufen shower toilet complies with the requirements of EU Directive “Restriction of Hazardous Substances” (2002 / 95 / EC). It is largely free of hazardous substances such as lead, cadmium, mercury, and chromium VI. Correct disposal of old appliances Waste electrical equipment often contains materials that are still usable. At the same time, however, they also contain many hazardous substances that guarantee the operational reliability and safety of the equipment.
V = volt, Hz = hertz, W = watt, m = metre, MPa = megapascal, bar = bar, kg = kilogram, °C = degrees Celsius, s = second Subject to modifications The Cleanet Navia shower toilet complies with the requirements of: EU Directive 2014 / 35 / EU (Low-Voltage Directive) EU Directive 2014 / 30 / EU (EMC, electromagnetic compatibility)
Any obligation on the part of Laufen originates from the respective warranty conditions, which also include the complete and decisive warranty obligation of Laufen.
Need help?
Do you have a question about the CLEANET NAVIA and is the answer not in the manual?
Questions and answers
skyllearmen bevæger sig 5 mm ud og tilbage igen og så sker der ikke mere.
If the Laufen CLEANET NAVIA spray arm moves 5 mm out and back but does not function further, switch off the main switch under the appliance, wait approximately 1 minute, then switch it on again. If the issue persists, contact Laufen customer services.
This answer is automatically generated
water heater is empty