The Intenza Water Filter - Saeco RI9828/47 Operation And Maintenance Manual

INTENZA WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, select the water fi lter function under the machine
settings menu (see page 22). By setting the water fi lter status to ON, the machine informs the user when the
fi lter must be replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards) in
cold water and gently press its sides so as to let the air bubbles out.
1
Remove the small white fi lter from
the tank and store it in a dry place
sheltered from dust.
4
Fill the tank with fresh drinking
water and re-insert it into the
machine.
7
1.2.4.2. water fi lter
on
off
reload water
fi lter
Press "reload water fi lter".
Once fi nished, the "close steam knob" message appears on the display. Turn the knob back to the rest position ( ). Fill
the water tank if necessary.
The machine is now ready for use and the water fi lter is activated (see page 22).
NOTE: if the Intenza water fi lter is not used, insert the small white fi lter previously removed (see step 1) into
the tank.
2
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
5
Place a container beneath the hot
water / steam wand.
8
Have you replaced the old water
fi lter with a new one?
Press the key to confi rm and
activate of the new water fi lter.
3
Insert the fi lter in the empty tank. The
reference mark and the groove must
match. Push fi rmly until it is
completely inserted.
6
1.2.4 water settings
rinse water fi lter
on off
water
hardness
3/4
Access the machine settings menu
(see page 20 and 22). Press "water
settings". Press "water fi lter".
9
Turn the knob until the
position is reached. Water
dispensing begins.
7