Philips HD8942/12 Operating Instructions Manual page 35

Philips saeco xelsis automatic espresso machine hd8942/12 xelsis focus

Hide thumbs Also See for HD8942/12:

Table of Contents

MACHINE MENU

WATER MENU

HARDNESS

ENABLE FILTER

ACTIVATE FILTER

This menu allows setting correct water parameters for beverages dispensing.

To change the machine water hardness setting.

The "Water Hardness" function allows adjusting the machine to the level of

hardness of the water used. The machine will then request descaling at the

right moment.

Measure water hardness as shown on page 5.

To activate/deactivate the warning signal to replace the water fi lter. By

activating this function, the machine notifi es the user when the water fi lter

needs to be replaced.

OFF: Warning disabled.

ON: Warning enabled (this value is automatically set when the fi lter is

activated).

To activate the fi lter after its installation or replacement. Refer to the relevant

section on page 7 to correctly install and/or replace the fi lter.

Table of Contents

Xelsis hd8942